5. FUNCTIONAL OVERVIEW

See illustrations on page 4

 

 

REMOTE CONTROL

 

CONNECTIONS

(fig. 2)

 

(fig. 3)

1On / Off switch z / y

For switching the remote control as well as the projector on and off.

Note:

The remote control will always use some power, even when not in use. The remote control unit will automatically switch off when not used for 30 minutes.

2Tracking Ball

For manipulating the mouse cursor on the connected computer.

Notes:

The Tracking Ball only functions when the provided USB Mouse Receiver is connected to the USB port of a PC.

The minimum system requirements for the USB Mouse receiver are Windows 98 and/or Windows 2000 or higher.

A cursor control requires the presence of data signal.

3Mouse left and Mouse Right (-/--)

The mouse left/right buttons (-/--) on the remote control function as the left and right mouse buttons of your PC, only in case the provided USB Mouse receiver properly is connected to the PC.

4Cursor Control

To operate and navigate through the activated menu via up/down and the left/right cursor buttons

5Auto sync

For activating the Auto sync operation in Data mode.

6Input

For selecting in sequence the Data or Video signal as the current projection source.

The button toggles between Data 1, Data 2 or Video signal.

7Audio / Video - Mute

For muting the sound of the projector (or an externally connected sound amplifier) and for muting the picture.

8Lens

For selecting the optical lens adjustments Zoom, Focus, Digital Keystone correction and Digital Image Shift (see Note). The button toggles between the ZOOM-, FOCUS-, KEYSTONE and DIGITAL SHIFT function.

Note:

Digital Image Shift feature can only be addressed while being in the WIDE and NORMAL (WIDE) picture display modes during video or DTV input. (See page 24 for details.)

9OK

For action confirmation in the menu when the menu is on the screen (activated)

0D-Zoom

For addressing the D-Zoom function. The button toggles between the digital magnification factors, x1, x2, x3, x4, x6 and x8.

!Menu

For activating and de-activating the On Screen Display Menu

@Back light

For switching on the button illumination.

The back-light will switch off automatically after 5 seconds.

AData 1 in (15 pin)

Input socket for connecting to the Data out terminal of a computer.

BAudio 1 in (3.5 mm stereo minijack)

Input socket for connecting to the Audio out terminal of a computer or any other audio equipment.

CData 2 in (15 pin)

Input socket for connecting to the Data out terminal of a computer.

DAudio 2 in (3.5 mm stereo minijack)

Input socket for connecting to the Audio out terminal of a computer or any other audio equipment.

EData 1 in (BNC) (R (Pr), G/G sync (Y), B (Pb), HD (C sync), VD)

Input sockets for connecting Data 1 BNC connection.

FData out (15 pin)

Output socket for connecting to the Data in terminal of another data projector or data monitor.

GAudio out (3.5 mm stereo minijack)

Output socket for connecting to the Line Input sockets of an amplifier or stereo system.

HAC socket

For connecting the projector to the powercord.

IS-Video in (4 pin mini DIN)

Input socket for connecting to any other Audio Video equipment equipped with a S-Video output socket.

JRS-232C port (9-pin mini-DIN)

For connecting a computer to the projector with a RS-232C cable (optional). The computer can be used in this way to control the projector.

KVideo in (RCA)

Input socket for connecting to any other Audio Video equipment equipped with a Video output socket. (PAL, NTSC, SECAM).

LAudio in L/R (RCA)

Input sockets for connection to the AUDIO OUT sockets of a video recorder (S-VHS, PAL, NTSC, SECAM).

M15 pin/BNC switch

To switch between 15 pin or BNC Data 1 input.

8

Page 10
Image 10
Philips PXG20 manual Remote Control Connections