9. OTHER SETTINGS
ON-SCREEN DISPLAY OVERRIDE FUNCTION
This function allows you to turn off the 
’ in the GUI menu, the
1.Press Menu.
2.Press 1 / 2 to select ‘Options’.
3.Press 3 / 4 to select ‘OSD Display’.
4.Press 1 / 2 to select ‘
’ to turn on or ‘
’ to turn off the
5.To exit from the GUI, press Menu.
ECONOMY MODE
This function allows you to reduce the power consumption when the projector is in Standby mode.
MONITOR OUT / RS232C OFF FUNCTION
This projector consumes power when using a monitor connected to the Data out port for Data in 1, 2 and a computer connected to the RS232C port. When not using these ports, ‘MNTR Out/RS232C’ can be set to ‘ 
’ to reduce standby power consumption.
Description of Monitor Out/RS-232C Off
Standby power for Monitor
Monitor
1.Press Menu.
2.Press 1 / 2 to select ‘Options’.
3.Press 3 / 4 to select ‘MNTR Out/RS232C’, and then press 2.
4. Press 3 / 4 to select ‘ 
’ or ‘ 
’.
5.To exit from the GUI, press Menu.
AUTOMATIC POWER SHUTOFF FUNCTION
When no input signal is detected for more than 15 minutes, the projector will automatically shut off. The
Description of Automatic Power Shutoff
Power automattically shuts off after 15 minutes of no signal input
Automatic Power Shutoff disabled
1.Press Menu.
2.Press 1 / 2 to select ‘Options’.
3.Press 3 / 4 to select ‘Auto Power Off’.
4.Press 3 / 4 to select the ‘ 
’ or ‘ 
’.
5.To exit from the GUI, press Menu.
Note:
‘Auto Power Off’ is factory preset to ‘ 
’, and ‘MNTR Out/RS232C’ is factory preset to ‘ 
’.
PASSWORD
A password can be set by the user and used with the keylock level to prevent adjustments to certain settings on the GUI
Setting the Password
1.Press Menu.
2.Press 1 / 2 to select ‘Options’.
3.Press 3 / 4 to select ‘Password’, and then press 2.
25
