Philips SA2MUS32, SA2MUS08S/17, SA2MUS16 user manual Technical data, System requirements

17 Technical data

Power

Power supply: 1,100 mAh Li-ion polymer internal rechargeable battery

Play time¹

-audio: 24 hours

-video: 5 hours

Software

Philips Songbird: to update firmware and transfer music

Connectivity

Headphone 3.5 mm

USB 2.0 High speed

HDMI

Sound

Channel separation: 50 dB

Frequency Response: 20 - 18,000 Hz

Output power: 2 x 2.7 mW (for EU version);

2x 10.5 mW (for Non-EU version)

Signal to noise ratio: > 85 dB

Audio playback

Supported formats:

Bit rates	Sampling rates
MP3:
8 - 320 kbps and	8, 11.025, 16, 22.050,
VBR	32, 44.1, 48 kHz
WMA:
5 - 320 kbps	8, 11.025, 16, 22.050,
	32, 44.1, 48 kHz
FLAC:
up to 1.5 Mbps	48 kHz
APE:
up to 1.5 Mbps	48 kHz
OGG:
up to 320 kbps	8 - 48 kHz
AAC:
up to 320 kbps	8 - 48 kHz

Video playback
Supported formats:	glish
MPEG4 (in .avi and .mp4)
RMVB	En
WMV
Picture display
Supported formats:
JPEG
BMP
PNG
GIF
Storage media
Built-in memory capacity²:
SA2MUS08 8GB NAND Flash
SA2MUS16 16GB NAND Flash
SA2MUS32 32GB NAND Flash
Display
Touch-sensitive color LCD 480 x 320 pixels
(HVGA)

Note

•• ¹ Rechargeable batteries have a limited number of charge cycles. Battery life and number of charge cycles vary by use and settings.

•• ² 1GB = 1 billion bytes; available storage capacity is less. Full memory capacity may not be available as some memory is reserved for the player. Storage capacity is based on 4 minutes per song and 128 kbps MP3 encoding.

System requirements

•Windows® XP (SP3 or above) / Vista / 7

•Pentium III 800 MHz processor or higher

•512 MB RAM

•500 MB hard disk space

•Internet connection

•Windows® Internet Explorer 6.0 or later

•CD-ROM drive

•USB port

EN 37