10 Hookups With a Stereo TV
|
|
| antenna or |
|
|
| 1 ANT(enna)cable to |
|
| ANT | IN Jack |
|
| IN |
|
AUDIO |
|
| |
OUT | IN | OUT |
|
|
|
| |
VIDEO | CH3 CH4 |
| |
|
| ||
VIDEO (yellow) and |
| 2 |
|
AUDIO (white) OUT Jacks |
| Video Cable | |
|
| ||
|
|
| |
3 Audio Cable
●Audio and Video cables are not supplied.
1
Connect the antenna or cable to the ANT(enna) IN Jack on the back of the VCR.
2
Connect a video cable to the yellow VIDEO OUT Jack on the back of the VCR. Then, connect the other end of the video cable to the VIDEO IN Jack on your TV.
3
Connect an audio cable to the white AUDIO OUT Jack on the back of the VCR. Then, connect the other end of the audio cable to the AUDIO IN Jack on your TV.
(If your TV has Right and Left AUDIO IN Jacks, you must use a “Y” splitter audio cable as illustrated to deliver audio to the TV’s right and left channels.)
4
Turn on your TV, making sure it is in Line Input (or Auxiliary In or Video In) mode. Please refer to your TV instruction book for details.
Audio and Video
IN Jacks on TV
Helpful Hint
•This hookup will not give you stereo sound. To get stereo sound, use the connections on page seven and select the channel to be viewed at the TV (with the VCR turned off).
