Hookups With a Cable Box/Direct Broadcast System (cont’d) 9
With this connection:
●You may watch one channel while recording another.
●You may not record scrambled channels.
1 VCR |
|
| 2 Cable Box/DBS |
|
| ANT | |
|
| IN |
|
|
|
| IN |
OUT | IN | OUT | OUT |
VIDEO | CH3 CH4 |
| |
|
| ||
Cable |
|
| RF coaxial |
|
| cable | |
Signal |
|
| |
|
|
| |
75V |
|
ANT | / |
CABLE | |
RF coaxial | 3 | TV’s ANTENNA | |
IN Jack | |||
cable |
Connections
1
Connect a Cable signal to the VCR’s ANT(enna) IN Jack.
2
Use an RF coaxial cable (supplied) to connect the OUT Jack on the VCR to the IN Jack on the Cable Box/DBS.
3
Use a second RF coaxial cable to connect the OUT Jack on the Cable Box/DBS to the ANTENNA IN Jack on the TV.
Recording One Channel/Watching Another
1
Put the Cable Box/DBS on the same channel as the VCR’s CH3/CH4 switch. (Make sure the TV is on the Cable Box/DBS output channel, 03 or 04.)
Then, with the VCR in VCR position (the VCR/TV light will appear on the front of the VCR), use the CHANNEL o/p button to select the channel you want to record at the VCR. Start the recording.
2
Press the VCR/TV button once so that the VCR/TV light appears.
3
Select the channel you want to watch at the Cable Box/DBS.
Helpful Hint
•When you play a tape, make sure the Cable Box/DBS is set to the same channel as the CH3/CH4 switch on the VCR. Set the TV to the Cable Box/DBS output channel (03 or 04).
