6 Using the Alarm Clock
Putting Batteries in the Alarm Clock
1
Remove the battery compartment lid on the back of the alarm clock. Use your finger or fingernail to flip down the lid.
2
Insert one AA battery inside the battery compartment with its + and – ends placed as shown in the picture at right.
3
Replace the battery compartment lid.
Using the Alarm Clock Holder
1
Pop the three slots of the alarm clock holder into the three holes on the left side of the front of the VCR. The holder will curve down, like a bowl, when placed correctly.
2
A velcro strip is supplied. Peel off the tape backing, then stick one piece of the velcro to the front of the VCR and one piece to the top of the clock as shown in the picture at right. Make sure the velcro pieces will touch when the alarm clock is in place in the holder.
3
Set the alarm clock in the clock holder.
1 2 3
Velcro on
front of VCR
Velcro on
back of clock
POWER
Alarm clock
holder
Alarm clock placed
POWERcorrectly on alarm clock holder
Setting the Time and the Alarm
1
Turn the right knob to set the current time.
2
Turn the left knob to set the time for the alarm.
3
Set the OFF/ON switch to ON. At the proper time, the alarm will sound. The alarm will sound until you move the OFF/ON switch to OFF.
•Set the VCR’s internal clock for a timer recording or One- Touch Recording. Details are on pages
•When you do not use the alarm, set the OFF/ON switch on the back of the alarm clock to OFF.
•The alarm will sound in the next
•The alarm sound is a beep. The bells on the top of the clock are for appearance only. The bells will not ring.
OFF/ON |
|
Switch |
|
Alarm Knob | Time Knob |
(on the left | (on the right |
as you look | as you look |
at the back | at the back |
of the clock) | of the clock) |
