Philips VRKD12BL, VRKD11YL Real-Time Counter Memory, Press the Play button to watch the tape

36 Real-Time Counter Memory

Follow the steps below to reset the real-time counter to zero at a tape location you want to refer to later. Make sure:

●The VCR is on and is in VCR position. The VCR/TV light will appear. If it does not, press the VCR/TV button once.

●There is a tape in the VCR.

1
Play, fast forward, or rewind a tape to the location that you would
like to refer to later. Press the STOP button to stop the
tape.
2	1
Press the EXIT/C.RESET button repeatedly to reset the
real-time counter to zero.

0 : 00 : 00

3

Within five seconds, press the COUNTER MEMORY but-

ton so that M appears on the screen beside the real-time 2 counter.

M 0 : 00 : 00

POWER

CHANNEL

PAUSE

PLAY

STOP

F.FWD

REW

RECORD VCR/TV

SPEED MENU DISPLAY

EXIT/ C. RESET COUNTER MEMORY

4

3

4

To go to a tape location where the real-time counter was reset to zero, press the REW(ind) button or the F.FWD button when playback is stopped.

When the tape reaches the point at which the real-time counter was reset to zero, the tape will stop.

Press the PLAY button to watch the tape.

Helpful Hints

•You may only set the real-time counter memory at one location at a time. If you set the real-time counter to zero at a second loca- tion, the previous real-time counter to zero setting will be erased.

•To erase the real-time counter memory, press the COUNTER MEMORY button repeatedly so that the M disappears from the screen.

•The COUNTER MEMORY button does not function if AUTO REPEAT is set to [ON]. Details are on page 33.