110
CPP Monitor 2000 User’s Manual
2. The CPP Monitor 2000 won’t
communicate with my computer using
the modem.
The slave ID in the unit does not
match the Slave ID in Manager 2000.
The CPP Monitor 2000 is on the phone
communicating with someone else.
The wrong Comm Port is selected for
your modem.
The CPP Monitor 2000 is connected to
an incompatible telephone line.
The unit is on-line with a computer
through the RS232 port and therefore
On the “Open Connection” screen,
click on the EDIT button. On the left
corner click on the box labeled “Re-
cover from Unit Reset.” Click OK and
then try to connect again.
Wait until the phone LED goes off or
turn the Power switch OFF and then
ON.
Change the Comm Port setting on the
Communications Setup screen. On the
“Open Connection” form, click on
MODEM and then SETUP.
The CPP Monitor must be connected
to a standard (2-wire Analog) tele-
phone line, and not to a digital exten-
sion to a phone system.
Close the on-line session through the
RS232 port.
Cause SolutionProblem