Phonetics 2000 - page 88

88
CPP Monitor 2000 User’s Manual
After the beep, say your message clearly. The input alarm messages
may be up to 4 seconds long. The ID message can be up to 6
seconds long. CPP Monitor 2000 will beep at the end of the allotted
time.
Below is an example of a voice status report:
“Hello, this is 610-555-2000” (ID number)
“This is the CPP Monitor 2000 in lift station 21.” (user-recorded ID
message)
“Input 1, jockey pump #1 overload, closed, OK”
“Input 2, jockey pump #2 overload, closed, OK”
“Input 3, main pump overload, closed, OK”
“Input 4, wet well level, 8.9 feet, OK”
“Input 5, dry well sump pump, Off, OK”
“Input 6, exit flow, 746.9 gpm, OK”
“Input 7, wet well air temperature, 54.4 degrees fahrenheit, OK”
“Input 8, waste grinder motor overload, closed, OK”
“The electricity is On”
“Battery voltage 8.6 volts, OK.”
“Goodbye”