36
CPP Monitor 2000 User’s Manual
New Unit Data Form
Procedure1. Click the Open button on the Toolbar, then click the
“New” button on the “Open Connection” form. Or, from
the menu bar choose File, then New Unit.
2. Fill in the Unit Description and Phone Number. This sets
up a record that the software will reference whenever you
want to communicate with or check information about
this unit.
3. Enter a status password. If this the first time the unit is
being set up, you must also enter a programming pass-
word or you will not be able to program the unit.
4. Select the type of password access you wish to log in
with: status or programming.
* The status password allows viewing access only. No program-
ming changes will be possible. The status password is
automatically saved to your hard disk and will be entered for
you when you attempt to communicate with the unit.