54
CPP Monitor 2000 User’s Manual
Input Label/Units Input OK graphic Input ALARM graphic
none [check mark] [red X]
OK/Fault [check mark] [red X]
On/Off [Light Bulb - ON] [Light Bulb - OFF]
Running/Stopped [Traffic Light - GREEN] [Traffic Light - RED]
AC Power [Light Bulb - ON] [Light Bulb - OFF]
DESTINATIONS
CPP Monitor 2000 will call up to 32 telephone numbers or E-mail
addresses (both referred to as destinations) to report alarm condi-
tions or send reports. Destinations can be voice calls, fax machines,
computers with modems running CPP Monitor 2000 software, E-
mail addresses, numeric pagers, or alphanumeric pagers. You must
be on-line with the unit to program the Destination parameters.
Once you are on-line, choose Program from the main menu, then
select Destinations. You can also access the Destination program-
ming from the Toolbar button labeled Destinations.
Dialout Destinations form
The Dialout Destinations form allows you to program information
for up to 32 destinations. The parameters and their options are listed
below:

Name:

This field allows you to program a description (16 characters max)
for each destination. The name will appear on faxes and E-mail
transmissions whenever an alarm or report is sent to the destination.
If you are entering a fax destination be sure to use the name of
person who you intend to receive the fax.