61
Chapter 4: Programming
Intercall Delay:
The intercall delay is the amount of time CPP Monitor 2000 will wait
after completing a call before calling the next destination. The delay
is in seconds, with a default of 30.
Note: A 30-second delay is too short to allow a call
back if a pager is being called. Increase the delay
time enough to accommodate your pager.
Send Report:
CPP Monitor 2000 can be programmed to automatically send reports
to selected destinations. Check this box to include this destination
when sending reports.
Note: Reports may only be sent to Fax or E-mail
destinations.
DATALOGGINGCPP Monitor 2000’s built-in Data Logger can log and store informa-
tion on all 8 universal inputs, AC power and backup battery voltage.
You must be on-line with the unit to program the Datalogging
parameters. Once you are on-line, choose “Functions” from the
main menu, then select Data Logging. You can also access the Data
Log programming from the Toolbar button labeled Data Log.
Note that whenever you change any parameters on the Data Log
form the datalogger in the CPP Monitor 2000 will be reset. If you
need to make changes to your programming, be sure to “Retrieve
Data” first.