Specifying a Look 47
Deko500 User’s Guide
inner
creates an edge that extends inward from the outer edge of the
edged detail.
border
creates an edge that extends both outward and inward from the
outer edge of the edged detail.
filled
creates an edge that extends outward from the outer edge of
the edged detail; the inside is filled with the edge color.
Outer Inner Border Filled
Size
Controls the size of the edge, from 0 (no edge) to 100 (very large
edge).
Priority
Determines whether the edge appears in front of or behind other
details. By default, Deko500 assigns a priority to each detail so
that they render from front to back, in the order they appear in the
Details list. Use Priority to change the rendering order. Priority
ranges from 0 (closest to viewer) to 1000 (farthest from viewer).
Priority also controls the rendering order of overlapping details
from different styles.
From previous detail
Specifies which other details in the look provide the shape on
which this edge is based:
face
produces an edge based only on the face detail.
frame
produces an edge around the first frame detail above the edge
in the Details list.
previous
produces an edge based on the “To next detail” setting of the
detail immediately above the edge in the Details list.
underline
produces an edge around the first underline above the edge in
the Details list.
To next detail
Determines what this edge will send to the detail immediately
below it in the Details list:
previous
sends whatever was sent to the edge from the detail above it.