Playing a Sequence 95
Deko500 User’s Guide
To resume a paused sequence:
Do one of the following:
Right-click the mouse.
Click the pause button in the Sequence window.
Choose Pause Sequence (Pause) from the Sequence menu.
Choose Play Sequence (Alt+Enter) from the Sequence menu.
Click the play button in the Sequence window.
Use a GPI trigger.
The pause button light goes off and the play button lights up
green.
USING A GPI TRIGGERTo connect a GPI trigger:
1. Connect the triggering device to an available com port, if it is not
already connected. Refer to the figure below.
2. Restart Deko500.
1
2
3
4
5
6
7
8
9
SW1
J1
DE9S
R1
4.7K R2
510
CR1
(GREEN)
CR2
(RED)
CD
TR
ND
Optional circuitry
To enable GPI triggering:
1. Activate the Sequence window (F11).
2. From the Sequence menu, choose GPI Settings.
3. In the GPI Trigger Settings dialog box, check GPI Enabled, enter
the Com port name (e.g. COM2), then choose OK.