Pinnacle Speakers DEKO500 C OMPOSING R To compose a graphic for a roll effect:, To run a roll effect:, To adjust duration or spacing for smooth roll playback:, Note

Creating a Sequence 90
Deko500 User’s Guide
4. Choose the file from the File Name list or type it in the File Name
text box, then click OK or press Enter.
COMPOSING ROLLS
To compose a graphic for a “roll” effect:
1. Activate a graphic window (F5).
2. In the Text menu, select Vertical Scrolling. A scrollable graphic
can be higher than one screen height.
3. Compose the text for the roll, scrolling down as necessary.
4. Save the graphic.
To run a roll effect:
1. Activate the Sequence window (F11).
2. Enter the graphic’s file name, specify “roll” as the effect, and enter
a playback rate.
3. Press Alt+Enter to run the effect.
To adjust duration or spacing for smooth roll
playback:
1. Activate the Sequence window (F11).
2. From the Sequence menu, choose Smooth Roll Playback
Adjustment, then select one of the following from the drop-down
menu:
 None—Turns off Smooth Roll Playback Adjustment.
Deko500 will not suggest any adjustments.
 Full and Half Vertical Resolution Rates—Deko500 suggests
adjustments based on acceptability of full and half vertical
resolution rates. Allows some aliasing.
 Only Full Vertical Resolution Rates—Deko500 suggests
adjustments based on acceptability of full vertical resolution
rates only. Allows only clean rates.
3. Choose OK or press Enter.
Note When you enter a playback rate for a roll effect, Deko500
displays any suggested adjustments in a dialog box. You can
choose to decrease or increase duration of the roll or original
line spacing of the graphic. Line spacing adjustments are not
offered when they would not be effective, e.g. if the document
is non-scrollable or if you choose a page-per-second rate.