02Controls and displays

PRESET /

Use to select preset radio stations (page 53) and to select SIRIUS Radio channels (page 70).

8MASTER VOLUME dial

9PHONES jack

Use to connect headphones. When the headphones are connected, there is no sound output from the speakers (page 43).

10Listening mode buttons

AUTO/DIRECT

Switches between Auto surround mode (Auto playback on page 35) and Stream Direct playback. Stream Direct playback bypasses the tone controls for the most accurate reproduction of a source (page 38).

STEREO/ALC

Switches between stereo playback, Auto level control stereo mode (page 37) and Front Stage Surround Advance modes (page 37).

STANDARD

Press for Standard decoding and to switch between the various 2Pro Logic II, 2Pro Logic IIx, 2Pro Logic IIz and NEO:6 options (page 34).

ADV SURROUND

Switches between the various surround modes (page 36).

11iPod iPhone DIRECT CONTROL

Change the receiver’s input to the iPod and enable iPod operations on the iPod (page 64).

12 iPod iPhone/USB terminal

Use to connect your Apple iPod or USB mass storage device as an audio source (page 62 and page 65).

13 AUDIO/VIDEO input

See Connecting to the front panel video terminal on page 30.

14 MCACC SETUP MIC jack

Use to connect a microphone when performing Auto MCACC setup.

Operating range of remote control

The remote control may not work properly if:

There are obstacles between the remote control and the receiver’s remote sensor.

Direct sunlight or fluorescent light is shining onto the remote sensor.

The receiver is located near a device that is emitting infrared rays.

The receiver is operated simultaneously with another infrared remote control unit.

30° 30°

7 m (23 ft.)

10

En