05Listening to your system
Setting | What it does |
A.DLY | This feature automatically corrects the |
(Auto Delay) | between components connected with an HDMI cable. The |
| audio delay time is set depending on the operational status |
| of the display connected with an HDMI cable. The video |
| delay time is automatically adjusted according to the audio |
| delay time.g |
Option(s)
OFF
ON
C.WIDTHh
(Center Width) (Applicable only when using a center speaker)
Spreads the center channel between the front right and left | 0 to 7 |
speakers, making it sound wider (higher settings) or | Default: 3 |
narrower (lower settings). |
|
DIMEN.h | Adjusts the surround sound balance from front to back, | ||
(Dimension) | making the sound more distant (minus settings), or more | Default: 0 | |
| forward (positive settings). |
| |
|
|
| |
PNRM.h | Extends the front stereo image to include surround | OFF | |
(Panorama) | speakers for a ‘wraparound’ effect. |
| |
ON | |||
|
| ||
|
|
| |
C.IMGi | Adjust the center image to create a wider stereo effect with | 0 to 10 | |
(Center image) | vocals. Adjust the effect from 0 (all center channel sent to | Default: 3 | |
(Applicable only when | front right and left speakers) to 10 (center channel sent to | (NEO:6 MUSIC), | |
using a center speaker) | the center speaker only). | 10 (NEO:6 CINEMA) | |
|
|
| |
H.GAIN | Adjusts the output from the front height speaker when | L (Low) | |
(Height Gain) | listening in DOLBY PLIIz HEIGHT mode. If set to H, the |
| |
M (Mid) | |||
| sound from the top will be more emphasized. | ||
|
| ||
|
| H (High) | |
|
|
|
a.You can change the MIDNIGHT/LOUDNESS options at any time by using MIDNIGHT button.
b.You can change the Sound Retriever feature at any time by using S.RETRIEVER button.
c.WMA and MP3 playback available only via iPod/USB input.
d.This setting works only with dual mono encoded Dolby Digital and DTS soundtracks.
e.The initial set AUTO is only available for Dolby TrueHD signals. Select MAX or MID for signals other than Dolby TrueHD.
f.You shouldn’t have any problems using this with most SACD discs, but if the sound distorts, it is best to switch the gain setting back to 0 dB.
g.This feature is only available when the connected display supports the automatic audio/video synchronizing capability
h.Only available with
i.Only when listening to
42
En