The System Setup menu | 06 |
2Select output resolution.1
•AUTO – The resolution is selected automatically according to the capacity of the TV (monitor) connected by HDMI.
•PURE – The signals are output with the same resolution as when input.
•480p/720p/1080i/1080p – The signal is output with the resolution specified here. (480p means the resolution of 480p/576p)
3When you’re finished, press RETURN. You return to the Video Parameter menu.
AspectSpecifies the aspect ratio when analog video input signals are output at the HDMI OUT terminal. Make your desired settings while checking each setting on your display (if the image doesn’t match your monitor type, cropping or black bands appear).
1Select ‘Aspect’ from the Video parameter menu.
5.Video Parameter |
| 5c.Aspect |
|
| |
|
|
|
|
|
|
| a.Video Converter |
| BD | NORMAL | |
| b.Resolution |
| DVD | [THROUGH] | |
| c.Aspect |
| TV/SAT | [THROUGH] | |
|
|
| DVR/VCR | [ NORMAL ] | |
|
|
| VIDEO | [THROUGH] | |
|
| Return | Return | ||
2Select desired output aspect ratio.2
•THROUGH – The input video signal is output unchanged.
•NORMAL – Black bands will appear either at top and bottom or on both sides.
3When you’re finished, press RETURN. You return to the Video Parameter menu.
Note
1• When set to a resolution with which the TV (monitor) is not compatible, no picture is output. Also, in some cases no picture will be output due to copyright protection signals. In this case, change the setting.
• When a display is connected by HDMI, if this is set to something other than PURE and 480i/576i analog signals are input, 480p/576p signals are output from the component output terminals.
2If the image doesn’t match your monitor type, adjust the aspect ratio on the source component or on the monitor.
Español Nederlands Italiano Français Deutsch English
51
En