Pioneer 920 Resolution, Video Converter, The System Setup menu, 06The System Setup menu, The Video Parameter setting

06The System Setup menu

The Video Parameter setting

This receiver can up-convert the video signal input from the composite/component video terminals; the output is from the HDMI OUT terminal. The following shows the various settings for this function.

1Press RECEIVER on the remote control, then press the SETUP button.

An on-screen display (OSD) appears on your TV. Use /// and ENTER on the remote

control to navigate through the screens and select menu items. Press RETURN to confirm and exit the current menu.

System Setup

1.Auto MCACC 2.Manual SP Setup 3.Input Assign 4.Speaker System 5.Video Parameter

Return

2Select ‘Video Parameter’ from the System Setup menu.

System Setup	5.Video Parameter
1.Auto MCACC	a.Video Converter
2.Manual SP Setup	b.Resolution
3.Input Assign	c.Aspect

4.Speaker System 5.Video Parameter

Return Return

3Select the setting you want to adjust. If you are doing this for the first time, you may want to adjust these settings in order:

•Video Converter – Converts video signals for output from the HDMI OUT terminal for all video types (see below).

•Resolution – Specifies the output resolution of the video signal (see below).

•Aspect – Specifies the aspect ratio (page 51).

4Make the adjustments necessary for each setting, pressing RETURN to confirm after each screen.

50

Video Converter

This setting specifies valid/invalid for the function that converts the input video signal from each composite/component video terminal. When OFF is selected, Resolution and Aspect can not be set.

1Select ‘Video Converter’ from the Video parameter menu.

5.Video Parameter		5a.Video Converter
	a.Video Converter	BD		ON
	b.Resolution	DVD	[	OFF	]
	c.Aspect	TV/SAT	[	OFF	]
		DVR/VCR	[	OFF	]
	Return				Return

2Select the setting for converting each type of video input.

•ON – The signal is output also to the HDMI OUT terminal.

•OFF – The signal input from the HDMI terminal of the selected input function will be output from the HDMI OUT terminal. The signal input from the analog composite video and the component video will not be output from the HDMI OUT terminal.

3When you’re finished, press RETURN. You return to the Video Parameter menu.

Resolution

Specifies the output resolution of the video signal (when video input signals are output at the HDMI OUT terminal, select this according to the resolution of your monitor and the images you wish to watch).

1Select ‘Resolution’ from the Video parameter menu.

5.Video Parameter	5b.Resolution
a.Video Converter	Resolution	AUTO
b.Resolution
c.Aspect
Return		Return

En