Pioneer 920 The System Setup menu, The Speaker System setting

The System Setup menu

2Select ‘Input Assign’ from the System Setup menu.

System Setup

1.Auto MCACC 2.Manual SP Setup 3.Input Assign 4.Speaker System 5.Video Parameter

Return

3Select ‘Component Input’ from the Input Assign menu.

3.Input Assign	3a.Component	Input
a.Component Input	Component–1	BD
	Component–2	[ DVD ]
	Return	Return

4Select the number of the component video input to which you’ve connected your video component.

The numbers correspond with the numbers beside the inputs on the rear of the receiver.

5Select the component that corresponds with the one you connected to that input. Select between BD, DVD, TV, DVR or OFF.

•Use / and ENTER to do this.

•If you assign a component input to a certain function, any component inputs previously assigned to that function will automatically be switched off.

•Make sure you have connected the audio from the component to the corresponding inputs on the rear of the receiver.

6When you’re finished, press RETURN. You return to the Input Assign menu.

•For the assignment of the digital signal inputs, see Choosing the input signal on page 43.

The Speaker System setting

Specify either using the surround back speaker (or the speaker B), or the front height speaker connection with the B-speaker terminals.

• Default setting: Surr. Back

1Press RECEIVER on the remote control, then press the SETUP button.

An on-screen display (OSD) appears on your TV. Use ///and ENTER on the remote

control to navigate through the screens and select menu items. Press RETURN to confirm and exit the current menu.

System Setup

1.Auto MCACC 2.Manual SP Setup 3.Input Assign 4.Speaker System 5.Video Parameter

Return

2Select ‘Speaker System’ from the System Setup menu.

System Setup		4.Speaker System
	1.Auto MCACC	SP System
			Surr. Back
	2.Manual SP Setup
	3.Input Assign
	4.Speaker System
	5.Video Parameter
	Return		Return

3Select the speaker system setting using

/.

•Surr. Back – Sound is output from the surround back speaker or the speaker B.

•Height – Sound is output from front height speaker.

4When you’re finished, press RETURN. You return to the System Setup menu.

06

Español Nederlands Italiano Français Deutsch English

49

En