Additional information
TroubleshootingIncorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with this component, check the points below. Take a look at the other components and electrical appliances being used, because sometimes the problem may lie there. If the trouble isn’t sorted out even after going through the checks below, ask your nearest Pioneer authorized independent service company to carry out repair work.
•If the unit does not operate normally due to external effects such as static electricity disconnect the power plug from the outlet and insert again to return to normal operating conditions.
ProblemRemedy
The power does not turn on.
•Disconnect the power plug from the outlet, and insert again.
•Make sure there are no loose strands of speaker wire touching the rear panel. This could cause the receiver to shut off automatically.
The receiver suddenly | • After about a minute (you won’t be able to switch the unit on during this |
switches off. | time), switch the receiver back on. If the message persists, call a Pioneer |
| authorized independent service company. |
No sound is output when a • Make sure the component is connected correctly (refer to Connecting
function is selected. | your equipment on page 16). |
| • Press MUTE on the remote control to turn muting off. |
| • Press SPEAKERS to select the proper speaker set (see Switching the |
| speaker terminal on page 20). |
| • Press SIGNAL SEL to select the proper input signal (see Choosing the |
| input signal on page 43). |
No image is output when a • Make sure the component is connected correctly (refer to Connecting your
function is selected. | equipment on page 16). |
| • Select the correct component (use the MULTI CONTROL buttons). |
| • Check The Input Assign menu on page 48 to make sure you’re assigned |
| the correct input. |
| • The video input selected on the TV monitor is incorrect. Refer to the |
| instruction manual supplied with the TV. |
| • For HDMI, or when Video Converter is set to OFF and a TV and another |
| component are connected with different cords (in Video Converter on |
| page 50), you must connect your TV to this receiver using the same type |
| of video cable as you used to connect your video component. |
| • Some components (such as video game units) have resolutions that |
| may not be converted. If adjusting this receiver’s Resolution setting (in |
| Resolution on page 50) and/or the resolution settings on your component |
| or display doesn’t work, try switching Video Converter (in Video Converter |
| on page 50) OFF. |
|
|
72
En