Pioneer 920 15

Controls and displays

S.RETRIEVER

Press to restore CD quality sound to compressed audio sources (page 38).

SB CH

Press to select ON, AUTO, OFF the surround back channel.

CH SELECT

Press repeatedly to select a channel, then use LEV +/– to adjust the level (page 47).

LEV +/–

Use to adjust the channel level.

Press to switch on/off Acoustic Calibration EQ setting (page 39).

MIDNIGHT

Switches to Midnight or Loudness listening (page 41).

SPEAKERS

See Switching the speaker terminal on page 20.

PHASE

Press to switch on/off Phase Control (page 38).

DIMMER

Dims or brightens the display. The brightness can be controlled in four steps.

Press SIRIUS first to access:

D.ACCESS

After pressing, you can access a radio station directly using the number buttons (page 70).

12  SOURCE

Press to turn on/off other components connected to the receiver (see page 58 for more on this).

13 TV CONTROL buttons

These buttons are dedicated to control the TV assigned to the TV button. Thus if you only have one TV to hook up to this system assign it to the TV button (see page 57 for more on this).



Use to turn on/off the power of the TV.

INPUT

Use to select the TV input signal.

CH +/–

Use to select channels.

VOL +/–

Use to adjust the volume on your TV.

14MASTER VOLUME +/– Use to set the listening volume.

15MUTE

Mutes/unmutes the sound.

16 DISP

Switches the display of this unit. The listening mode, sound volume, Speaker System setting or input name can be checked by selecting an input source.1

17 SHIFT

Press to access the ‘boxed’ commands (above the buttons) on the remote. These buttons are marked with an asterisk (* ) in this section.

Español Nederlands Italiano Français Deutsch English

Note

1 The Speaker System setting may or may not be displayed, depending on the input source you have selected.