06The System Setup menu

Tip

You can change the channel levels at any time by press RECEIVER , then press CH

SELECT and LEV +/– on the remote control. You can also press CH SELECT and use /  to select the channel, and then use /  to adjust the channel levels.

Speaker Distance

For good sound depth and separation from your system, you need to specify the distance of your speakers from the listening position. The receiver can then add the proper delay needed for effective surround sound.

1Select ‘Speaker Distance’ from the Manual SP Setup menu.

2.Manual SP

Setup

2d.Speaker Distance

 

 

 

 

 

 

 

 

 

 

 

 

 

a.Speaker

Setting

Front L

 

 

10.0

ft

 

 

b.Crossover Network

Center

[

 

10.0 ft

]

 

c.Channel

Level

Front R

[

 

10.0

tt

]

 

d.Speaker

Distance

 

Surround R

[

 

10.0 ft

]

 

 

 

 

Surr. Back R

[ ––––

 

]

 

 

 

 

Surr. Back L

[ ––––

 

]

 

 

 

 

Surround L

[

 

10.0

ft

]

 

 

 

 

Subwoofer

[

 

10.0

ft

]

 

 

Return

 

 

 

Return

 

2Adjust the distance of each speaker using /.

You can adjust the distance of each speaker in 0.1 feet increments.

3When you’re finished, press RETURN. You return to the Manual SP Setup menu.

The Input Assign menu

You only need to make settings in the Input Assign menu if you didn’t hook up your equipment according to the default settings for the component video inputs.

Default settings: Component 1 BD Component 2 DVD

Important

If you connect any source component to the receiver using a component video input, you should have your TV connected to this receiver’s COMPONENT VIDEO OUT or HDMI OUT output (down converting component video is not possible after assigning an input).

If you didn’t make component video connections according to the defaults above, you must assign the numbered input to the component you’ve connected (or else you may see the video signal of a different component). For more on this, see Using the component video jacks on page 28.

1Press RECEIVER on the remote control, then press the SETUP button.

An on-screen display (OSD) appears on your TV. Use /// and ENTER on the remote

control to navigate through the screens and select menu items. Press RETURN to confirm and exit the current menu.

System Setup

1.Auto MCACC 2.Manual SP Setup 3.Input Assign 4.Speaker System 5.Video Parameter

Return

48

En