Pioneer AVIC-D1 Changing the Wide Screen, Mode, Operating the Picture Adjust- ment

	Changing the Wide Screen
AV
	Mode
	• For safety reasons, these functions are not
	available while your vehicle is in motion.
	To enable these functions, you must stop
	in a safe place and put on the parking
	brake before setting your route (see page
	12 Interlock for details).
	1 Touch “WIDE” to select the desired set-
	ting.
	Touch “WIDE” repeatedly to switch between
	the following settings:
	NORMAL (normal) — FULL (full) — JUST
	(just) — CINEMA (cinema) — ZOOM (zoom)
	NORMAL (normal):
	A 4:3 picture is displayed as it is, giving you no
	sense of disparity since its proportions are the
	same as that of the normal picture.
Functions	FULL (full):
	A 4:3 picture is enlarged in the horizontal
	direction only, enabling you to enjoy a 4:3 TV
	picture (normal picture) without any omis-
Other	sions.
	JUST (just):
	The picture is enlarged slightly at the center
8
	and the amount of enlargement increases
Chapter
	horizontally toward the ends of the picture,
	enabling you to enjoy a 4:3 picture without
	sensing any disparity even on a wide screen.
	CINEMA (cinema):
Setting
	as FULL or ZOOM in the horizontal direction
Source	A picture is enlarged by the same proportion
	and by an intermediate proportion between
	FULL and ZOOM in the vertical direction;
Audio	ideal for a cinema-sized picture (wide screen
	picture) where captions lie outside.
the
	ZOOM (zoom):
Customizing	A 4:3 picture is enlarged in the same propor-
	tion both vertically and horizontally; ideal for a
	cinema-sized picture (wide screen picture).
	❒ Different settings can be memorized for
	each video source.

❒When video is viewed in a wide screen mode that does not match its original aspect ratio, it may appear differently.

❒Remember that use of this system for commercial or public viewing purposes may constitute an infringement on the author’s rights protected by the Copyright Law.

❒Video will appear grainy when viewed in CINEMA or ZOOM mode.

❒The navigation map and the rear view cam- era picture is always FULL.

Operating the Picture Adjust- ment

•For safety reasons, these functions are not available while your vehicle is in motion. To enable these functions, you must stop in a safe place and put on the parking brake before setting your route (see page 12 Interlock for details).

You can adjust BRIGHT (brightness), CONTRAST (contrast), COLOR (color) and HUE (hue) for each source and rear view cam- era.

1 Press P.ADJ/B.LIGHT button to display

PICTURE ADJUST.

BRIGHTNESS — Adjust the black intensity CONTRAST — Adjust the contrast COLOR — Adjust the color saturation HUE — Adjust the tone of color (red is emphasized or green is emphasized) DIMMER — Adjust the brightness of display BACK-CAMERA— Switch to the picture adjustment display for the rear view camera

104