Appendix
Installing the Program
The program is installed to the Navigation Sys- tem using the application disc.
This is not necessary if your dealer already performed the installation.
When installing the program, you carry out the following operations. When all the setup proce- dures are completed, you can use the Navigation System.
1 Insert the disc while the vehicle is parked.
2 Select the language used for the Navi- gation System.
3 Setting the clock.
1 Park your vehicle in a safe place.
Leave the engine on, and make sure that the parking brake is applied.
2 Insert the Pioneer DVD Map Disc into the
When the upgraded program has been found, installation of the program starts immediately.
❒Do not insert anything other than a disc into the
❒If you cannot insert a disc completely or if a inserted disc is not recognized, check that the label side of the disc is up. Press
•Once the installation of the program starts, do not stop the engine of your vehi- cle nor switch off the Navigation System until the installation is completed and the following Audio screen appears.
NAVI/AV
3 | Press the MAP button to change the navi- |
|
| ||
| gation screen. |
|
4 | Touch “Yes/Oui”. |
|
| When you start the navigation unit for the first |
|
| time, you will see a confirmation message |
|
| asking if you wish to select another language. | Appendix |
| English is the default language of the Naviga- | |
|
|
tion System. If desired, you can select another language as shown.
❒To keep English, touch “No/Non”. After this, proceed to Step 7.
❒When you want to select another lan- guage, touch “Yes/Oui”, and proceed to the next step.
5 Select the language from the list.
Touch the language you want to use.
❒The language selected here is reflected for the Navigation functions (e.g., Destination search, etc.) only.
➲To Change the language ➞ Page 64 Installation of the program, in the language you chose, begins.
107