Pioneer AVIC-D1 operation manual How to Use the Map, How to view the map of the cur Rent location

How to Use the Map

Most of the information provided by your Naviga- tion System can be seen on the map. You need to get to know how the information appears on the map.

How to view the map of the cur-

rent location	NAVI
Map View
Displays standard map.

Switching the current position screen display mode

This section describes how to display the current position screen and change the map display mode.

(1)

(2)

(16)

(4)

(11)

(10)(8)

(7)

(17)

There are three types of map display and two additional view modes.

•Map View

•Guide View (during route guidance only)

•Route View (during route guidance only)

•Vehicle Dynamics

•Rear View (Only possible when the “CAMERA” is set to “ON”.)

1 Press the MAP button to display a map of the area around your current position.

2 Press the MAP button again.

(5) (12)(3) (9) (6)

Guide View

The standard map of your surroundings is over-

laid with the name of the street you will turn onto
next, and 2 arrows: the larger one to the left indi-
	Chapter
cating the direction of your next maneuver and
how far you are from approaching it, and the
smaller one to the right indicating the direction of
your second to next maneuver and how far you	2
are from approaching it.

3 Touch the mode name or press the MAP button to select the mode you want to dis- play.

(1)

(2)

(15)

(4)

(11)

(10)(8)

(7)	Menu and
	Map
(17)
(16)	Display
(3)

(5) (12) (9) (6)

❒If the mode is selected by pressing the MAP button, the screen automatically switches to the selected map display mode after 4 seconds.

Route View

Displays the name of the street you will next travel along and an arrow indicating the direction of travel.

Normal condition

(1)	(10)	(8)
(2)			(7)
(15)
				(13)
(4)
(11)			(3)
			(6)
(5)	(16) (9) (12)

29