Pioneer AVIC-D1 Switching the XM display, Storing and recalling broadcast stations, nel category

1 Touch the source icon and then touch “XM” to select the XM.

2 Touch “BAND” to select a XM band. Touch “BAND” repeatedly until the desired XM band is displayed, XM1, XM2 or XM3.

3 To perform tuning, touch or .

The channels move up or down step by step. Channels that cannot currently be selected are skipped, and the next channel is selected.

If you keep touching or , you can increase or decrease channel number contin- uously.

You can also perform manual tuning by mov- ing the joystick left or right.

You can also perform tuning within selected channel category.

➲Selecting the channel in the channel cate- gory ➞ Page 87

Switching the XM display

1 Touch .

Each touch of changes the information as follows:

Channel name — Artist name/feature — Song/ program title — Channel category

Storing and recalling broadcast stations

If you touch any of the preset tuning keys P1 — P6 you can easily store up to six broadcast sta- tions for later recall with the touch of a key.

1 When you find a station that you want to store in memory keep touching a preset tuning key P1 — P6 until the XM preset number (e.g., P.ch: 1) stops flashing.

The number you have touched will flash in the XM preset number indicator and then remain lit. The selected station has been stored in memory.

The next time you touch the same preset tun- ing key P1 — P6 the station is recalled from memory.

When the touch panel keys are not displayed, you can display them by touching the screen.

❒Up to 18 stations, 6 for each of three XM bands can be stored in memory.

❒ You can also use the following operations

to recall stations assigned to preset tuning	AV
keys P1 — P6.
• Using or in the detail information display
when the “CH NUMBER” mode is selected.

•Moving the joystick up and down when the “CH NUMBER” mode is selected.

Switching the XM channel select mode

You can switch if you select a channel with a channel number or within a selected category when you select a channel.

1 Touch “MODE” to select the desired channel select setting.

2 Touch “MODE” repeatedly to switch between

	the following channel select settings:			XM
	CH NUMBER (channel number select mode)			(GEX-
	— CATEGORY (channel category select
	mode)			P910XM)
Selecting a channel in the chan-
nel category
				Chapter7
1	Touch “MODE” to select the CATEGORY
	mode.
2 Touch or		to select the desired chan-
3	nel category.			Using
	Touch	or	to select the desired
				the
	channel in the selected channel category.
	❒ You can also perform steps 2 and 3 by			AV
	using the joystick.			Source
Selecting a XM channel directly				(PioneerAV
➲	Refer to page 84
Display the Radio ID				Equipment)
➲	Refer to page 85

87