(7)Detail information or preset list display Shows the detail information of the broadcast channel currently being received or the preset list.
(8)Category icon
Shows the category icon for the selected chan- nel.
➲Switching between the detail information dis- play and the preset list display ➞ Page 83
1 Touch the source icon and then touch “XM” to select the XM.
2 Touch “BAND” to select a XM band. Touch “BAND” repeatedly until the desired XM band is displayed, XM1, XM2 or XM3.
3 To perform tuning, touch 
or 
.
The channels move up or down step by step. If
you keep touching 
or 
, you can increase or decrease channel number contin- uously. You can also perform manual tuning by moving the joystick left or right.
Switching the XM channel select mode
You can switch the mode between the two meth- ods for selecting and listing the channel.
ALL CH mode :
You can select a channel from all channels when you operate.
CATEGORY mode :
You can select a channel within selected cate- gory when you operate.
1 Touch “MODE” to select the desired channel select mode.
Touch “MODE” repeatedly to switch between the two modes.
Switching between the detail information display and the pre- set list display
You can switch the left side of the basic screen according to your preference.
1 Touch 
(or “PRESET”).
Each touch of 
(or “PRESET”) changes the detail information display or preset list dis- play.
Detail information display (e.g. ALL CH mode)
Preset list display (e.g. ALL CH mode)
Storing and recalling broadcast stations
If you touch any of the preset tuning keys P1 — P6 you can easily store up to six broadcast sta- tions for later recall with the touch of a key.
1 Select the channel that you want to store in memory.
2 Touch “PRESET” to display the preset list.
3 Keep touching a preset tuning key P1 —
P6 until the XM preset number (e.g., P.ch:
1) stops flashing.
AV
XM
83
