Pioneer AVIC-D1 operation manual Setting Areas to Avoid, Registering an area to avoid

	Setting Areas to Avoid
NAVI
	If you register Areas to Avoid, such as crowded
	intersections or congested areas, routes can be
	calculated that avoid those areas. Areas to
	Avoid can be set from the Route Options menu.
	❒ An area not stored on the disc cannot be set
		as an Area to Avoid.

Registering an area to avoid

This section describes how to register an Area to Avoid for the first time. You can register up to five Areas to Avoid.

1 Touch “Route Options” in the Main menu, then touch “Designate Areas to Avoid”.

2 Select one of the items shown in “New Area”.

When registering for the first time, any item on the list is shown as “New Area”.

Chapter 3	3 Select the place to register and display
Destination	the map.
	Once a search is complete, a map with the
	➲ Searching places to register ➞ Page 35 to
	38
Your	specified location at its center appears.
to	❒ If you select the “Map Search”, move the
	scroll cursor to the place you want to set
Routea
	and touch “OK”.
Setting	4 Change the map scale and decide the size
	The Area to avoid is enclosed in a red frame.
	of the Area to Avoid.
	You can also change the map scale though
	the maximum map scale for registering Areas
	to Avoid is 0.1 mile (100 m).

5 Scroll the map, adjust the position of the red frame, and touch “OK”.

If you want to stop registration, touch “Back”.

❒Depending on the setting of route search con- ditions, you may not be able to avoid the spec- ified areas. The confirmation message is displayed on the screen at this time.

➲Information on route calculation conditions ➞ Page 45

Changing or deleting an area to avoid

You can subsequently change/rename/delete an Area to Avoid.

1 Touch “Route Options” in the Main menu, then touch “Designate Areas to Avoid”.

2 Select the area you want to change or delete.

3 Select the desired operation.

On this screen, you can select the following options:

Rename :

Changes the name. Enter the new name and touch “OK”. This returns you to the Route Options menu.

Change :

A specified area can be changed. For the next steps, see Step 3 in the “Registering an area to avoid” above .

Delete :

Delete the selected Area to Avoid.

42