Operating this unit
Tuner | 1 Press LIST. |
| Preset screen is displayed. |
Basic Operations
Section
02
1 2 3 4 5
6
1Band indicator
25(stereo) indicator
Appears when the selected frequency is being broadcast in stereo.
3LOC indicator
Appears when local seek tuning is on.
4Preset number indicator
5Signal level indicator
Shows the radio wave strength.
6Frequency indicator
%Select a band
Press BAND.
# Band can be selected from among FM1, FM2, FM3 or AM.
%Manual tuning (step by step)
Push
%Seek tuning
Push and hold
#You can cancel seek tuning by pushing
#If you push and hold
Storing and recalling broadcast frequencies
2Use
Turn to change the preset number. Press and hold to store.
3Use
Turn to change the station. Press to select.
# You can also change the station by pushing
# To return to the ordinary display, press BAND
or LIST.
# If you do not operate the list within about 30 seconds, the display automatically returns to the ordinary display.
Using the remote control
%When you find a frequency that you want to store in memory, press one of pre- set tuning buttons 1 to 6 and hold until the preset number stops flashing.
The number you have pressed will flash in the preset number indicator and then remain lit. The selected radio station frequency has been stored in memory.
The next time you press the same preset tun- ing button the radio station frequency is re-
called from memory.
# You can also recall radio station frequencies assigned to preset tuning numbers by pushing
Introduction of advanced operations
1Press
Operating this unit
You can easily store up to six broadcast fre- | 2 Use | ||
FUNCTION. | |||
quencies for later recall. | |||
Turn to change the menu option. Press to se- | |||
! | Six stations for each band can be stored in | ||
|
memory.lect.
En 13