Pioneer DEH-P6000UB Disconnecting a cellular phone, Registering a connected cellular phone

Section

06Available accessories

3Press MULTI-CONTROL to open the con- nection.

Always waiting flashes and the unit is now on standby for connection from a cellular phone.

4Use cellular phone to connect to this

unit.

# The link code is set to 0000 as default. You can change this code in the initial setting. Refer to Entering PIN code for Bluetooth wireless con- nection on page 33.

Disconnecting a cellular phone

1 Display the function menu.

Refer to Function and operation on page 42.

2Use MULTI-CONTROL to select Disconect phone in the function menu. Device name of the connected phone appears in the display.

3Press MULTI-CONTROL to disconnect a cellular phone from this unit.

After disconnection is completed, Disconnected is displayed.

Registering a connected cellular phone

1 Display the function menu.

Refer to Function and operation on page 42.

2Use MULTI-CONTROL to select Set phone in the function menu.

3Push MULTI-CONTROL up or down to select a registration assignment.

P1 (user phone 1)—P2 (user phone 2)—P3 (user phone 3)—G1 (guest phone 1)—G2

(guest phone 2)

# As you select each assignment, you can see whether or not a phone is already registered. If the assignment is empty, No data is displayed. If the assignment is already taken, the device name appears. To replace an assignment with a new phone, first delete the current assignment. For

more detailed instructions, see Deleting a regis- tered phone on this page.

4Press MULTI-CONTROL to register the currently connected phone.

When registration is completed,

Reg.Completed is displayed.

# If the registration fails, Reg.ERROR is dis- played. In this case, return to step 1 and try again.

Deleting a registered phone

1 Display the function menu.

Refer to Function and operation on page 42.

2Use MULTI-CONTROL to select Delete phone in the function menu.

3Push MULTI-CONTROL up or down to select a registration assignment.

P1 (user phone 1)—P2 (user phone 2)—P3 (user phone 3)—G1 (guest phone 1)—G2

(guest phone 2)

# If the assignment is empty, No data is dis- played and operation is not possible.

4Push MULTI-CONTROL right to select Delete YES.

Delete YES is displayed. Deleting phone is now on standby.

5Press MULTI-CONTROL to delete the phone.

After the phone is deleted, Deleted is dis- played.

44 En