Pioneer DEH-P6000UB Basic Operations, Power ON/OFF, Selecting a source, Adjusting the volume

Section
02		Operating this unit
	Basic Operations		AUX input may generate noise. In this case,
	Power ON/OFF		stop charging.
			! External unit refers to a Pioneer product (such
	Turning the unit on		as ones available in the future) that, although
			incompatible as a source, enables control of
	% Press SRC to turn the unit on.
			basic functions with this unit. Two external
			units can be controlled with this unit. When
	Turning the unit off		two external units are connected, the external
	% Press OFF and hold until the unit turns		unit is automatically allocated to external unit
			1 or external unit 2 by this unit.
	off.
			! When this unit’s blue/white lead is connected
			to the vehicle’s auto-antenna relay control
	Selecting a source		terminal, the vehicle’s antenna extends when
	You can select a source you want to listen to.		this unit’s source is turned on. To retract the
			antenna, turn the source off.
	To switch to the built-in CD player, load a disc
	in the unit (refer to page 15).

%Press SRC repeatedly to switch be- tween the following sources.

XM tuner—SIRIUS tuner—Tuner—Televi- sion—DVD player/Multi-DVD player— Built-in CD player—Multi-CD player— iPod—USB—External unit 1—External unit 2—AUX1—AUX2—BT Audio—BT Tel- ephone

Notes

!In the following cases, the sound source will not change.

—When no unit corresponding to the se- lected source is connected.

—When there is no disc or magazine in the player.

—When the iPod is not connected to this unit.

—When AUX (auxiliary input) is set to off (refer to page 30).

—When the BT Audio source is set to off (refer to Activating the BT Audio source on page 32).

!AUX1 is set to on by default. Turn off the AUX1 when not in use (refer to Switching the auxili- ary setting on page 30).

!Charging the portable audio player using car’s DC power source while connecting it to

Adjusting the volume

%Turn MULTI-CONTROL to adjust the sound level.

12 En