Pioneer DEH-P6000UB operation manual Selecting an XM channel directly, Switching the XM display

Section

06 Available accessories

1	2	3 4	3 Press DIRECT.
			The XM channel of entered number is
			selected.
			# After entering the number input mode, if you
			do not perform an operation within about eight
			seconds, the mode is automatically canceled.

5

1XM band indicator

2XM channel number indicator

3XM preset number indicator

4XM channel select setting indicator

Shows what channel select setting has been selected. CH is displayed when

Channel number is selected, and CAT is dis- played when Category is selected.

5XM text information

Shows the text information of broadcast channel.

%Select an XM band.

Press BAND.

# Band can be selected from XM-1, XM-2 or XM-3.

%Select a channel.

Push MULTI-CONTROL left or right.

#If you push and hold MULTI-CONTROL left or right, you can increase or decrease channel num- ber continuously.

#You can also perform tuning from a desired channel category. (Refer to Selecting a channel in the channel category on the next page.)

Selecting an XM channel directly

When using the remote control, you can select the XM channel directly by entering the de- sired channel number.

1 Press DIRECT.

Channel number input display appears.

2Press 0 to 9 buttons to enter the desired

channel number.

# You can cancel the input number by pressing

CLEAR.

Switching the XM display

%Press DISP to switch the XM display.

# You can scroll the text information to the left by pressing and holding DISP.

Storing and recalling broadcast stations

You can easily store up to six broadcast sta- tions for later recall.

!Six stations for each band can be stored in memory.

1 Press LIST.

Preset screen is displayed.

2Use MULTI-CONTROL to store the se- lected station in memory.

Turn to change the preset number. Press and hold to store.

The XM preset number you have selected will flash and then remain lit. The selected station has been stored in memory.

3Use MULTI-CONTROL to select the de- sired station.

Turn to change the station; press to select.

# You can also change the station by pushing

MULTI-CONTROL up or down.

# If you do not operate the list within about 30 seconds, the display is automatically returned to the ordinary display.

50 En