Pioneer DEH-P6000UB Selecting the Sirius channel select mode, Using the Game Alert function

	Section
Available accessories	06

Introduction of advanced operations

1Press MULTI-CONTROL to display the main menu.

Note

You can also perform this operation in the menu that appears by using MULTI-CONTROL.

2Use MULTI-CONTROL to select

FUNCTION.

The function selection menu is displayed. Turn to change the menu option. Press to select.

3Turn MULTI-CONTROL to select the function.

Channel mode (channel select mode setting)

—Game alert (game alert setting)— Team setting (team setting)—Game info (game info)—Pause (pause)

Notes

!You can also select the function by pressing FUNCTION on the remote control.

!To return to the ordinary display, press BAND.

!If you do not operate functions within about 30 seconds, the display is automatically re- turned to the ordinary display.

!During the Instant Replay mode, you can se- lect Pause (pause). Refer to Using Instant Re- play function on page 55.

!Pause is the same as that of the built-in CD player. (Refer to Pausing playback on page 18.)

Selecting the SIRIUS channel select mode

You have two methods for selecting a channel: by number and by category. When selecting by number, channels in any category can be selected. Select by category to narrow your search down to only channels in a particular category.

%Press SAT MODE repeatedly to select the desired channel select setting. Channel number (channel number select set- ting)—Category (channel category select setting)

Selecting a channel in the channel category

1Select the channel select settings to Category.

Refer to Selecting the SIRIUS channel select mode on this page.

2Push MULTI-CONTROL up or down to select the desired channel category.

3Push MULTI-CONTROL left or right to select the desired channel in the selected channel category.

Using the Game Alert function

Only when SIR-PNR2/SIR-PNR2C is connected to this unit, you can operate this function. This unit can alert you when games involving your favorite teams are about to start. To use this function you need in advance to set up a game alert for the teams.

Selecting teams for Game Alert

1Display the function selection menu. Refer to Introduction of advanced operations on this page.

2Use MULTI-CONTROL to select

Team setting in the function menu.

3Push MULTI-CONTROL left or right to select a desired league.

League names are switched in the display.

4Push MULTI-CONTROL up or down to select a desired team.

Teams in the selected category are switched in the display.

Available accessories

En 53