Pioneer DEH-P6000UB Connecting a cellular phone, Searching for available cellular phones

	Section
Available accessories	06

!Disconect phone (disconnect phone)

!Set phone (registering phone)

!Clear memory (clear memory)

!PH.B.Name view (phone book name view)

!Number dial (call by entering number)

If connected but not registered yet

The following functions cannot be operated.

!Search & Connect (search and connect)

!Connection open (connection open)

!Connect phone (connect phone)

!PH.B.Name view (phone book name view)

!Clear memory (clear memory)

If already connected and registered

The following functions cannot be operated.

!Search & Connect (search and connect)

!Connection open (connection open)

!Connect phone (connect phone)

!Set phone (registering phone)

Notes

!You can also select the function by pressing FUNCTION on the remote control.

!To return to the playback display, press BAND.

!Device info is the same as that of the Blue- tooth audio. (Refer to Displaying BD (Bluetooth Device) address on page 40.)

!PH.B.Name view (phone book name view) cannot be selected for cellular phone regis- tered guest phone.

!If cellular phone is connected to this unit via Bluetooth wireless technology with HSP (Head Set Profile), PH.B.Name view, Clear memory, Number dial and Refuse calls cannot be selected.

!If you do not operate functions other than Search & Connect, Connection open, Connect phone, PH.B.Transfer, Disconect phone, Number dial,

Clear memory and PH.B.Name view within about 30 seconds, the display automatically returns to the ordinary display.

Connecting a cellular phone

Searching for available cellular phones

1 Display the function menu.

Refer to Function and operation on the previous page.

2Use MULTI-CONTROL to select Search & Connect in the function menu.

3Press MULTI-CONTROL to search for available cellular phones.

While searching, SEARCHING flashes. When available cellular phones featuring Bluetooth wireless technology are found, device name or Name not found (if names cannot be ob-

tained) is displayed.

# If this unit fails to find any available cellular phones, Not found is displayed.

4Push MULTI-CONTROL up or down to select a device name you want to connect.

5Press MULTI-CONTROL to connect the selected cellular phone.

While connecting, Connecting flashes. To complete the connection, check the device name (Pioneer BT Unit) and enter the link code on your cellular phone. If the connection

is established, Connected is displayed.

# The link code is set to 0000 as default. You can change this code in the initial setting. Refer to Entering PIN code for Bluetooth wireless con- nection on page 33.

Using a cellular phone to initiate a connection

1 Display the function menu.

Refer to Function and operation on the previous page.

2Use MULTI-CONTROL to select Connection open in the function menu.

Available accessories

En 43