Pioneer DEH-P6000UB Using Sound Retriever, Scanning folders and tracks, Pausing playback

Section

02Operating this unit

%Press RDM to turn random play on.

Tracks play in a random order.

# To turn random play off, press RDM again.

Note

You can also turn this function on or off in the menu that appears by using MULTI-CONTROL.

Using Sound Retriever

Sound Retriever function automatically en- hances compressed audio and restores rich sound.

%Press S.Rtrv repeatedly to select the de- sired setting.

OFF (off)—1—2

# 2 is more effective than 1.

Scanning folders and tracks

Scan play searches the song within the se- lected repeat range.

1 Display the function menu.

Refer to Introduction of advanced operations on the previous page.

2Use MULTI-CONTROL to select Scan mode in the function menu.

3Press MULTI-CONTROL to turn scan play

on.

The first 10 seconds of each track is played.

4When you find the desired track press

MULTI-CONTROL to turn scan play off.

# If the display has automatically returned to the playback display, select Scan mode again by

using MULTI-CONTROL.

# After scanning of a disc (folder) is finished, normal playback of the tracks begins.

Pausing playback

1 Display the function menu.

Refer to Introduction of advanced operations on the previous page.

2Use MULTI-CONTROL to select Pause in the function menu.

3Press MULTI-CONTROL to turn pause

on.

Playback of the current track pauses.

# To turn pause off, press MULTI-CONTROL again.

Note

You can also perform this operation in the menu that appears by using MULTI-CONTROL.

Using disc title functions

You can input CD titles and display the title. The next time you insert a CD for which you have entered a title, the title of that CD is dis- played.

Entering disc titles

Use the disc title input feature to store up to 48 CD titles in the unit. Each title can be up to 10 characters long.

1 Display the function menu.

Refer to Introduction of advanced operations on the previous page.

2Play the CD that you want to enter a title for.

3Use MULTI-CONTROL to select TitleInput "A" in the function menu.

4Press DISP to select the desired charac- ter type.

Press DISP repeatedly to switch between the following character types:

Alphabet (upper case), numbers and symbols

—Alphabet (lower case)—European letters, such as those with accents (e.g. á, à, ä, ç)— Numbers and symbols

5Push MULTI-CONTROL up or down to select a letter of the alphabet.

18 En