Pioneer DEH-P6000UB Using preset numbers, Making a call by entering phone number, Clearing memory

Section

06Available accessories

#If the number is already in the Phone Book then the name is also displayed.

#Turning MULTI-CONTROL switches to the pre- vious or next phone number diplayed in the de- tailed list.

#If you do not operate anything within about 30 seconds, the list display is canceled automati- cally.

4Press MULTI-CONTROL to make a call.

# For an international call, press and hold MULTI-CONTROL to add + to the phone number.

5To end the call, push MULTI-CONTROL down.

Using preset numbers

Making a call by entering phone number

Important

Be sure to park your vehicle and apply the park- ing brake when performing this operation.

1 Display the function menu.

Refer to Function and operation on page 42.

2Use MULTI-CONTROL to select

Number dial in the function menu.

# You can also enter in this menu from the standby display by pressing DIRECT on the re- mote control.

3Push MULTI-CONTROL up or down to select a number.

Important

Be sure to park your vehicle and apply the park- ing brake when performing this operation.

Numbers that you dial frequently can be as- signed to presets for quick recall.

1Select a desired phone number from the phone book or the call history. Or di- rectly enter a desired phone number.

To select a desired phone number from the Phone Book or the Call History, see the in- structions explained in previous pages. To di- rectly enter a desired phone number, see Making a call by entering phone number on this page.

2Press and hold one of 1 to 6 on the re- mote control to store the phone number. The selected phone number has been stored in memory. The next time you press the same preset button, the phone number is recalled from memory.

#You can also input numbers by pressing 0 to 9 on the remote control.

4Push MULTI-CONTROL left or right to move the cursor to the previous or next po-

sition.

# Up to 24 digits can be entered.

5When you completed entering the number, press MULTI-CONTROL.

Call confirmation appears.

6Press MULTI-CONTROL again to make a call.

7To end the call, push MULTI-CONTROL down.

Clearing memory

1 Display the function menu.

Refer to Function and operation on page 42.

2Use MULTI-CONTROL to select Clear memory in the function menu.

3Push MULTI-CONTROL up or down to select an item.

Each time MULTI-CONTROL is pushed up or down, the items are switched in the following order:

48 En