SIRIUS Satellite Radio tuner, Displaying the Radio ID

Available accessories

Section

Using the remote control

%When you find a station that you want to store in memory, press one of preset tuning buttons 1 to 6 and hold until the XM preset number stops flashing.

The number you have pressed will flash in the XM preset number indicator and then remain lit. The selected station has been stored in memory.

The next time you press the same preset tun- ing button the station is recalled from mem-

ory.

# You can also recall stations assigned to preset tuning numbers by pushing MULTI-CONTROL up or down.

Switching the XM channel select mode

You have two methods for selecting a channel: by number and by category. When selecting by number, channels in any category can be selected. Select by category to narrow your search down to only channels in a particular category.

%Press SAT MODE repeatedly to select the desired channel select setting. Channel number (channel number select set- ting)—Category (channel category select

setting)

# If you do not operate the function within about 30 seconds, the display is automatically returned to the channel display.

Note

2Push MULTI-CONTROL up or down to select the desired channel category.

3Push MULTI-CONTROL left or right to select the desired channel in the selected channel category.

Displaying the Radio ID

Channel number select setting

1Select the channel select settings to Channel number.

Refer to Switching the XM channel select mode on this page.

2Push MULTI-CONTROL left or right to

select RADIO ID.

# If you select another channel, display of the ID

code is canceled.

# Display of the ID code repeats displaying RADIO ID and the ID code one after the other.