Pioneer HD-V9000 Updating the firmware, Putting the batteries in the remote control, Website concerning this unit, Chapter, English

Chapter 1

Before you start

What’s in the box

•Remote control x 1

•AA/R6 batteries x 2

•Power cord x 1

•Rack mount brackets x 2

•HDMI retaining cover x 1

•Screws (black) x 8

•Warranty

•Operating instructions (this document)

A large Philips screwdriver (No. 2) is required to mount the rack mount bracket. Please procure one.

•When disposing of used batteries, please comply with governmental regulations or environmental public institution’s rules that apply in your country/area.

•Do not use or store batteries in direct sunlight or other excessively hot place, such as inside a car or near a heater. This can cause batteries to leak, overheat, explode or catch fire. It can also reduce the life or performance of batteries.

Updating the firmware

When the software is updated, information concerning this product may be published on the Pioneer website (see below). Check the update or service information concerning this product on the site.

English

Putting the batteries in the remote control

1Open the rear cover and insert the included batteries (AA/R6 x 2).

Insert as indicated by the and marks in the battery compartment.

Caution

•Do not use any batteries other than the ones specified. Also, do not use a new battery together with an old one.

•When loading the batteries into the remote control, set them in the proper direction, as indicated by the polarity marks (and ).

•Do not heat batteries, disassemble them, or put them into flames or water.

•Batteries may have different voltages, even if they look similar. Do not use different kinds of batteries together.

•To prevent leakage of battery fluid, remove the batteries if you do not plan to use the remote control for a long period of time (1 month or more). If the fluid should leak, wipe it carefully off the inside of the case, then insert new batteries. If a battery should leak and the fluid should get on your skin, flush it off with large quantities of water.

Website concerning this unit

In order to allow users to take maximum advantage of this unit’s functions, a “Communications Interface User’s Manual” and Windows application (HD PILOT) are available on the Pioneer website. In addition to reading this manual, please also visit the Pioneer website.

http://www.pioneerelectronics.com/PUSA/Products/

BusinessProducts/ProfessionalVideo (For USA and Canadian models)

http://www.pioneerprovideo.eu (For European model)