03Connecting USB storage devices

Caution

•Be sure to turn this unit’s power off (to the standby mode) before connecting or disconnecting USB storage devices.

•When using an external HDD (hard disk drive) as the external storage device, be sure to turn on the HDD’s power before turning on this unit’s power.

•If the USB storage device is write-protected, be sure to disable the write-protection.

•When connecting the USB cable, hold onto the plug, set the plug in the proper direction for the port, then insert it horizontally.

•Placing excessive loads on the plug may result in faulty contact, making it impossible to read the data on the USB storage device.

•Do not unplug the power cord when a USB storage device is connected and this unit’s power is turned on.

Rear panel

Connecting the power cord

Connect the power cord after all the connections between the devices have been completed.

Rear panel

AC IN

EXT TERMINAL

Uninterruptible power supply, etc.

Power cable (included)

USB

 

 

memory,

USB cable

 

etc.

 

(commercially

Hard disk

 

 

available)

drive, etc.

Note

•It is not possible to use the two USB ports simultaneously.

•Devices may not work if connected to the USB port via a memory card reader or USB hub.

•Use a USB cable with a length of two meters or less.

34

En