Other settings (Options)

Setting item

Settings

Description

Clock Setting1

Year/Month/Day/

 

Hour/Minutes/

Sets the date and time of this unit’s internal clock.

 

Seconds

 

 

 

 

Front Key

Enable

Unlocks operation of the buttons on the main unit’s front panel.

 

 

Disable

Locks operation of the buttons on the main unit’s front panel.2

 

 

Single

The stop mode is set after one file is played to the end.

File Play Mode3

 

 

All

When playback of one of the video files in the video folder on the SD memory card is

 

finished, the next file in the sorted order is played.

 

 

 

 

 

 

Off

Playback is not repeated.

Repeat Mode3

 

 

On

The file(s) is (are) played repeatedly. (Which files are played depends on the File Play Mode

 

setting.)

 

 

 

 

 

 

9Pin

Select this when connecting a computer to this unit’s RS-232C terminal using a 9-pin cross

Serial Port

cable (commercially available).

 

 

 

 

15Pin

Select this when connecting a computer to this unit’s EXT TERMINAL connector.4

 

2400

Sets the RS-232C terminal’s transfer rate to 2 400 bps.

 

 

 

Baud Rate

4800

Sets the RS-232C terminal’s transfer rate to 4 800 bps.

 

 

9600

Sets the RS-232C terminal’s transfer rate to 9 600 bps.

 

 

 

 

 

19200

Sets the RS-232C terminal’s transfer rate to 19 200 bps.

 

 

 

Extend Terminal

Standard

Sets the EXTEND TERMINAL button function to the preset standard.

 

 

User

Sets the EXTEND TERMINAL button function to the desired value (page 67).

 

 

 

 

 

Disable

The power does not turn off automatically even if no operation is performed for the specified

 

time.

 

 

Auto Power Off

 

 

 

The power turns off automatically (is set to standby) if no button is operated or there is no

 

Enable

command control or access from the LAN for over 2 hours when no SD memory card is

 

 

loaded.

 

 

 

Initialize3

No/Yes

When Yes is selected, this unit’s settings are restored to the defaults set upon purchase.5

Turn the power off then back on.

 

 

 

 

 

1.This cannot be set when NTP is set to Enable (page 49).

2.• The LCD button always operates (remains unlocked), regardless of the Front Key setting.

•To temporarily unlock operation of the buttons on the main unit’s front panel, press the LCD, ENTER and RETURN buttons on the front panel simultaneously for over one second. This only enables operation temporarily, and does not change the Front Key setting.

3.This cannot be changed during playback.

4.The 9-pin and 15-pin connectors cannot be used simultaneously for RS-232C signal transfer.

5.The following settings are restored to the defaults set upon purchase.

•All Video Settings items

•All Audio Settings items

•The following Network Settings items

–Network Connection

–Type

–Wakeup On LAN

–NTP

•All Initial Settings items aside from Clock Setting.

06

English

47

En