2Attach the HDMI retaining cover to the HDMI 03 cable.
Mount the HDMI retaining cover so that it retains the connector securely.
•Depending on the HDMI cable’s connector size, the gap and positional relationship between the HDMI retaining cover and HDMI holder may differ.
3Tighten the HDMI retaining cover’s screw into the HDMI screw hole to fasten the HDMI cable to this unit.
Caution
•Do not tighten the screw with excessive force. Doing so could damage the connector or cable.
•If the HDMI retaining cover is damaged, do not continue using it. The cable could come loose or the terminal could be damaged.
•The HDMI retaining cover is only designed to retain the connector. This does not provide strength against loads applied when the cable is pulled on, so be sure to fasten the cable to the rack, etc.
Connecting to a display
When also connecting to an amplifier using the HDMI cable, see Connecting to an amplifier (below).
Caution
•Hold the connector when connecting and disconnecting cables.
•Applying excessive force to the connector could result in faulty contact and prevent video signals from being output.
Rear panel
L | DIGITA L | HDMI | COMPONENT |
| LAN(10/100) | |
| AUDIO | OUT | VIDEO | OUT |
| |
AUDIO | OUT | Y | CB / PB | CR / PR | VIDEO OUT | ON |
OUT |
| NTSC | ||||
R |
|
|
|
| TV | 75 |
|
|
|
| SYSTEM | ||
|
|
|
|
| PAL | OFF |
EXT SYNC IN
|
|
| Match the direction |
|
|
| of the plug to the |
HDMI cable |
|
| terminal and insert |
|
| the plug straight in. | |
(commercially |
|
| |
|
|
| |
available) | To HDMI | It is also possible to connect this | |
| |||
| input | ||
| unit to an amplifier using the | ||
|
| ||
|
| HDMI cable. (See below) | |
|
|
| Direction of |
|
| Display | signal flow |
32
Connecting to an amplifier
For instructions on connecting the amplifier and display or the amplifier and speakers, see the amplifier’s operating instructions.
Caution
•Hold the connector when connecting and disconnecting cables.
•Applying excessive force to the connector could result in faulty contact and prevent video signals from being output.
Rear panel
L | DIGITA L | HDMI | COMPONENT |
| LAN(10/100) | |
| AUDIO | OUT | VIDEO | OUT |
| |
AUDIO | OUT | Y | CB / PB | CR / PR | VIDEO OUT | ON |
OUT |
| NTSC | ||||
R |
|
|
|
| TV | 75 |
|
|
|
| SYSTEM | ||
|
|
|
|
| PAL | OFF |
EXT SYNC IN
|
| Match the direction | |
|
| of the plug to the | |
HDMI cable |
| terminal and insert | |
| the plug straight in. | ||
(commercially | To HDMI | ||
| |||
available) | input | Direction of signal flow | |
| terminal |
| Amplifier | |
|
| To HDMI input |
From HDMI |
| terminal |
output | HDMI cable | Display |
terminal | (commercially | |
available)
Connecting the
VIDEO OUT and AUDIO OUT terminals
Connecting to a display
available) |
| R |
|
|
| SYSTEM | 75 | |
| Rear panel |
|
|
|
| |||
|
| L | DIGITA L | HDMI | COMPONENT |
|
| |
|
|
| AUDIO | OUT | VIDEO OUT |
|
| |
| AUDIO | OUT | Y | CB / PB CR / PR | VIDEO OUT | ON | ||
|
| OUT |
| NTSC | ||||
Audiocable (commercially | To | audio | input terminal |
| TV |
| ||
| cableBNC (commercially available) | |||||||
|
|
|
|
|
| PAL | OFF | |
|
|
|
|
|
|
| EXT SYNC IN | |
| It is also possible to connect |
|
| |||||
| to an amplifier. Use an audio |
|
| |||||
| cable |
|
| |||||
| digital audio cable to |
|
|
| ||||
| connect (see page 33). |
|
|
| ||||
|
|
| To video input terminal |
| ||||
|
|
| Tocomponent | Connect the VIDEO | ||||
Display | video input | |||||||
terminals | OUT terminal or | |||||||
|
|
| ||||||
| COMPONENT VIDEO | |
Direction of signal flow | OUT terminals. Use a | |
BNC cable with a | ||
| ||
| characteristic | |
| impedance of 75 Ω. |
En