Pioneer HD-V9000 About HDMI, Attaching the HDMI retaining cover

Chapter 3

Connections

Be sure to turn off the power (set it to standby) then unplug the power cord from the power outlet whenever making or changing connections.

Also refer to the operating instructions of the device being connected.

Connecting the HDMI OUT terminal

Using a single cable, video and audio signals can be transmitted to HDMI-compatible equipment as digital signals with no loss of quality.

Note

•This unit is designed for connection with HDMI- compatible devices. It may not operate properly when DVI devices are connected. When connecting DVI devices, check operation beforehand with the actual converters, cables, etc., that will be used.

•1080p video signals may not be output, depending on the HDMI cable being used.

About HDMI

This unit incorporates High-Definition Multimedia Interface (HDMI®) technology.

•HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC in the United States and other countries.

Note

•This unit does not support HDCP. HDCP is a standard for protecting audio and video contents with HDMI or DVI connections. Copyright-protected contents cannot be played on this unit.

•This unit does not support Deep Color, xvYCC or CEC.

•For the video output resolutions, see Video output formats on page 20.

Audio signals that can be

transferred with the HDMI OUT terminal

•Linear PCM (The following linear PCM signals can be output):

–Sampling frequency: 48 kHz

–No. channels: 2

Attaching the HDMI retaining cover

This unit comes with an HDMI retaining cover for preventing the HDMI cable from coming loose. Be sure to attach the cover.

Note

•Depending on type of HDMI cable connected, it may not be possible to fasten the cable with the HDMI retaining cover. In this case, fasten in place using the four fixing holes used when using a binder in step 1 below.

•The connector sizes of HDMI cables which can be fastened with the HDMI retaining cover are shown below. However, depending on the shape of the connector, the position of the cable, etc., it may not be possible to fasten the cable.

Cable	18 mm to 21 mm
	10 mm to 12 mm
Ø12 mm or less
	22 mm to 26 mm

Connector sizes of HDMI cables which can be fastened with the HDMI retaining cover (reference values)

1Attach the HDMI cable to this unit’s HDMI OUT terminal.

	RS	32C	HDMI screw hole
		-2
		L				HDMI holder
		AUDIO
		OUT	D
				IGITAL		Fixing holes for
		R
				OUT
			AUDIO			binding (4 holes)
				HDMI
				OUT
HDMI retaining cover				Y	COMPONENTVIDEO/
					CB	B	OUT
							C
							R /	PR
Screw		3						VIDEO	OUT
										SC
				1						NT
										EM	O
										TV
									SYST
										PAL	O

2HDMI cable

03

English

31

En