Note
•Only video signals with NTSC or PAL resolutions are output from the VIDEO OUT terminal. Set the output using the TV SYSTEM (NTSC, PAL) switch on this unit’s rear panel (page 26).
•Video signals with the resolution set at Setup are output from the COMPONENT VIDEO OUT terminals (set to 480/59.94i (USA and Canadian models)/576/50i (European model) upon shipment from factory). It is not possible to output signals with a resolution differing from the HDMI output (page 46).
•When EDID is set to On and HDMI connections are used, the HDMI output’s resolution setting has priority, so the output resolution of the signals output from the COMPONENT VIDEO OUT terminals may change automatically (page 46).
•When there is a display for monitoring, we recommend connecting it to the VIDEO OUT terminal.
Connecting the DIGITAL
Connecting the LAN (10/100) port
Use this to connect this unit to a hub connected to a network, etc. For details on this unit’s network functions, see page 70.
Be sure to connect to an Ethernet hub or router compatible with
Connecting to an Ethernet hub
This unit can be connected to an Ethernet hub using a LAN cable.
Caution
•Use an STP cable for the LAN cable. Failure to do so could result in serious electromagnetic problems.
Rear panel
03
English
AUDIO OUT terminal
VIDEO OUT
LAN(10/100)
NTSC ON
Rear panel
| L | DIGITA L | HDMI | COMPONENT |
|
|
|
| AUDIO | OUT | VIDEO OUT |
|
|
AUDIO | OUT | Y | CB / PB CR / PR | VIDEO OUT | ON | |
cableVideo/audio available)(commercially | OUT |
| NTSC | |||
R |
| digitalCoaxial cableaudio (commercially available) |
| TV | 75 | |
|
|
|
| SYSTEM | ||
|
|
|
|
| PAL | OFF |
|
|
|
|
|
| EXT |
|
|
|
| Direction of |
| |
|
| signal flow |
| |||
analog audio |
|
|
|
|
| |
signals can |
|
|
|
|
| |
also be |
|
|
|
|
|
|
connected. |
| To coaxial digital |
|
| ||
|
|
|
|
| ||
|
|
| audio input terminal |
| ||
To audio input |
|
| Amplifier |
|
| |
terminals |
|
|
|
| ||
|
|
|
|
|
| |
Note
•The following linear PCM signals can be output from this unit’s DIGITAL AUDIO OUT terminal:
–Sampling frequency: 48 kHz
–No. channels: 2
•To switch the picture with the amplifier, also connect the VIDEO OUT terminal.
TV
SYSTEM 
75
PAL OFF
EXT SYNC IN
LAN cable (commercially available)
LAN
3 2 1 WAN
Ethernet hub 
(router with hub functionality)
Note
•The LAN indicator on front panel lights when connected to the network (page 25).
•If DHCP is set to TYPE in the network settings and there is an available DHCP server on the connected network, the IP address is obtained automatically. If no DHCP server is available, set the IP address manually (page 49).
•Note that Pioneer will accept no responsibility whatsoever for any communication errors or malfunctions associated with your network connection and/or your connected equipment. Please contact your network device manufacturer.
33
En