Using Remote Control with Other Components | Pioneer VSX-45TX

Remote Control of Other Components

Using Remote Control with Other Components

CD/MD/CD-R/VCR/DVD/LD/DVD recorder/Cassette Deck operations

66

memo • The following operations are available from the receiver's remote control after you program it (see “Setting Up the Remote Control to Control Other Components,“ pages 62–65).

•To perform these operations, press the MULTI CONTROL button for the component you want to control.

•For more information on individual commands consult the manual that came with the component.

	Button(s)		Function	Components

	SOURCE		Press to switch the components between STANDBY and ON.	CD/MD/CD-R/VCR/DVD/LD/
				CD/MD/CD-R/VCR/DVD/LD/
				DVD recorder/Cassette deck
				DVD recorder/Cassette deck
			Press to return to the start of the current track or chapter. Repeated presses	CD/MD/CD-R/DVD/LD/
			skips to the start of previous tracks or chapter.

	4		Go back channels (channel − ).	VCR/DVD recorder

			Play the reverse side of the tape on a reversible deck.	Cassette deck

	¢		Press to advance to the start of the next track or chapter. Repeated presses	CD/MD/CD-R/DVD/LD/
	¢		skips to the start of following tracks or chapter.
			skips to the start of following tracks or chapter.

			Go forward channels (channel +).	VCR/DVD recorder

	8		Pause playback or recording.	CD/MD/CD-R/VCR/DVD/LD/
	8		Pause playback or recording.	DVD recorder/Cassette deck
				DVD recorder/Cassette deck

	¡		Hold down for fast forward playback.	CD/MD/CD-R/VCR/DVD/LD/
	¡		Hold down for fast forward playback.	DVD recorder/Cassette deck
				DVD recorder/Cassette deck
	1		Hold down for fast reverse playback.	CD/MD/CD-R/VCR/DVD/LD/
	1		Hold down for fast reverse playback.	DVD recorder/Cassette deck
				DVD recorder/Cassette deck
	3		Start playback.	CD/MD/CD-R/VCR/DVD/LD/
	3		Start playback.	DVD recorder/Cassette deck
				DVD recorder/Cassette deck

	7		Stop playback (on some models, pressing this when the disc is already	CD/MD/CD-R/VCR/DVD/LD/
	7		stopped will cause the disc tray to open).	DVD recorder/Cassette deck
			stopped will cause the disc tray to open).	DVD recorder/Cassette deck
	¶		Starts recording.	MD/CD-R/VCR/DVD recorder/
	¶		Starts recording.	Cassette deck
				Cassette deck
	SUBTITLE/
	DISP MODE		Displays/changes the subtitles on multilingual DVDs.	DVD/DVD recorder
	Button
			Change the display mode.	CD/MD/CD-R/VCR/LD

	Number		Directly access tracks on a program source.	CD/MD/CD-R/LD
	Buttons		Directly access chapter on a program source.	DVD/DVD recorder

			Directly select a channel.	VCR/DVD recorder

			Select tracks or chapter higher than 10. Press this button and the remaining	CD/MD/CD-R/DVD/LD/
	+10 Button		number to get the track or chapter (+10 Button + 3= track or chapter 13).	CD/MD/CD-R/DVD/LD/
	+10 Button			DVD recorder
			Some components may operate differently.	DVD recorder
			Some components may operate differently.
	ENTER/DISC		Press to start Search mode.	DVD
	Button		Press to start Search mode.	DVD
	Button

			Takes you to the disc navigator.	DVD recorder

			Changes between sides A & B of the disc.	LD

			Press to enter the selected channel.	VCR

			Selects a disc in a multi-disc CD player.	CD

	MENU		Displays menus concerning the current DVD, DVR or VCR you are using.	DVD/DVD recorder/VCR

	AUDIO		Changes the audio track of discs with more than one audio track.	DVD/LD/DVD recorder
			Changes between the tuner in the TV and the tuner in the VCR.	VCR

			Play the reverse side of the tape on a reversible cassette deck.	Double cassette 2nd deck

	TOP MENU
	/GUIDE		Displays the top menu of the current DVD, LD or DVR you are using.	DVD/LD/DVD recorder
	button

			Takes you to the guide menu of that system.	VCR
			Press to select a track	CD
	RETURN/		Takes you to the previous menu.	DVD/LD/VCR/DVD recorder
	EXIT button		Takes you to the previous menu.	DVD/LD/VCR/DVD recorder
	EXIT button

	2 3 5∞ &		Navigate menus/options.	DVD/LD/DVD recorder/VCR
	ENTER		Navigate menus/options.	DVD/LD/DVD recorder/VCR
	ENTER

			Basic playback options.	Double cassette 2nd deck

Image 66

Pioneer VSX-45TX Using Remote Control with Other Components, CD/MD/CD-R/VCR/DVD/LD/DVD recorder/Cassette Deck operations

Contents

VSX-45TX Important Notice Page Table of Contents Table of Contents Features Remote Control Battery Indicator Checking the Supplied AccessoriesPreparing the Remote Control Before You Start Opening the Front Panel Installing the ReceiverOperating range of remote control unit Before You Start Easy Setup Guide Part1 Home Theater The Basics Easy Setup Guide Part1 Hooking Up Your DVD Player & TVDigital Connections Speaker impedance setting of the receiver see Speaker ConnectionsSpeaker terminals Receiver exits the setup process Setting up the Main UnitDefault setting for the DIGITAL-2 jack is CD-R Assigning the Digital Inputs Switch on the receiver and your TV Easy Setup Guide Part2Setup MIC jack on the Front Panel Hook up the microphone to Check the speaker settings on the OSD Easy Setup Guide Part2 Play a DVD then adjust the Master Volume Playing a DVD with Surround Sound Component Video Input Default Settings Connecting Your EquipmentConnecting your TV Video Component video Connecting Your Equipment Connecting Video ComponentsConnecting a DVD player Not a PCM-only output Connecting VCRs or DVRs Connecting a Video Component to the Front Panel Connecting Satellite TV SAT Components Satellite tuner Turntable Connecting Analog Audio ComponentsAudio cords Connect red plugs to Components equipped with Connecting Digital Audio Components TypeType USB cable Digital Input Default Settings Coaxial cords/Optical cablesCoaxial cord FM wire antenna AM loop antenna Connecting the Radio AntennasUsing outdoor antennas To improve FM reception Connecting Speakers Speaker terminals also Bi-wiring your speakers Speaker impedance Speaker placement AC Power CordAC Outlet switched 100 W max Placing Your Speakers Displays & Controls Front Panel Displays & Controls Remote Control Digital NR DNR button see System SET UP buttonCommand button for other components see pages Video Select button see $ Return button Volume +/- buttonsRemote Setup button Input button Display Back Panel Speakers terminals see AC Outlet switched, 100 W maxMulti Room & Source Remote in terminals see pages USB Audio in terminal Setting Up for Surround Sound Enter If you want to change a setting before proceeding Surround back system setting. Press the Enter buttonSetting Up for Surround Sound Surrback System Surround Back System Quick setup When you have the setting you want Normal setupThrough the Normal setup menus NORMAL. Press the Enter button Center default setting is Small Speaker SettingFront default setting is Small Surround default setting is Small It. Press the Enter button Use the 5∞ buttons to select Speaker system settingIf it isn’t use the 5∞ buttons to select Speakers. Press Enter Channel Level channel balance Manual manual test tone modeAuto automatic test tone mode Channel Level should be selected. If Channel Delay Basic Operation Choose a Listening Mode one Two waysIndicator Stereo and Multichannel Playback Select the input signal corresponding Switching ANALOG/DIGITAL Signal InputPress the Signal Select button to Press Receiver Listening Modes Stereo modes Movie modes Surround mode THX Cinema 2PL II Movie 2PRO Logic II Movie Music modes Surround mode 2PL II Music 2PRO Logic II Music Press the EFFECT/CH SEL button Adjusting the Effect of a Listening ModeRepeatedly and select the setting You want. They appear Reducing Noise During Playback Digital NR Function Press Receiver Press the DNR button on the remote ControlListening with Acoustic Calibration EQ Press the Acoustic EQ button Each press switches Midnight mode on or off Listening in Loudness ModePress Receiver Press the Loudness button on Remote control When on, Midnight lights in the display Adjusting Bass and Treble Tone Control Press the BASS/TREBLE button repeatedly to select Bass orTreble DVD-Audio/MULTI Channel in Playback Listening in HI-BIT/SAMPLING modeRemote control or the Multi CH Press the Multi CH Input button on Press the SB CH Mode button on SB CH Mode buttonSB CH Mode Virtual Surround Back Mode Dual Mono setting and playback Using HeadphonesPhones jack Adjusting the Brightness of the Display Dimmer Video Select Using the Tuner Automatic and Manual Tuning Press the Band button to select Direct Access TuningUsing the Tuner Mode Press the Tuner Edit button to activate the memory function Memorizing Frequently Used StationsTune in the station you want Press the Enter button to input Naming Memorized Stations Press the Tuner button on the remote controlPress Enter when you have got Characters you want to enter To select the class To step through each channel in order Recalling Memorized StationsUse the Number buttons to select Channel you desire Press the Station -/+ buttons repeatedly Recalling Settings Stored in the Remote Control Remote Control of Other ComponentsSetting Up the Remote Control to Control Other Components Press the Remote Setup button for Three seconds Press ENTER. The preset code has Been entered Remote Control of Other ComponentsComplete will appear in the display Select Function blinks on the remote control Use the 5∞ buttons to select Learning and press EnterFor example DVD/LD Select KEY flashes in the display Select Exit and press Enter When youre done use the 5∞ Buttons to select ExitYou will return to the Remote Setup menu Start again to program other components in this manner Using Remote Control with Other Components CD/MD/CD-R/VCR/DVD/LD/DVD recorder/Cassette Deck operations Cable TV/Satellite TV/Digital TV/TV operations Buttons Function Components OFF, or Exit and press Enter Setting up the Direct FunctionUse the 5∞ buttons to select Dirctfnc and press Enter Use the 5∞ buttons to select on Functions that can be recorded Using Other FunctionsRecording from Audio/Video Components Playback the source to be recorded Stereo playback in another room Second Zone Speaker System B SetupUsing Other Functions Speaker Button Connect your PC to the USB Setting up and Using the USB Audio ConnectionCheck to see if the drivers are Correctly installed Terminal Necessary Change the PC audio setting ifSwitch on the receiver Select the USB input Connecting Additional Amplifiers Setup example Multi Room connections Sub room Main room Turn on the receiver, your TV and press Multi Room setupReceiver on the remote control Use the ∞5 buttons to select Exit Press Enter Press the Control button to enter Control mode Controlling the Multi Room system from the main room Controlling the Multi Room system from the sub room Remote control at the IR ReceiverPress Volume +/- to adjust From the sub room, point IR receiver remote sensor window To use this units remote controlPioneer SR System Operating other Pioneer components Receiver Multi Operations Performing Multi Operations When done select Exit and pressSelect Exit and press Enter again Press the Multi Operation Button Up the Remote Control to Control Other Components, pages Press the Remote Setup button for More than three secondsTo setup a command select Change and press Enter Use the 5∞ buttons to select SYS OFF and press Enter Using System OFF Press the System OFF button Use the 5∞ buttons to select Funcname and press Enter Editing Remote Control Display NamesPress the Remote Setup for more Than three seconds For the component you want to Press the buttons whose name you Want to change Editing Button Names KEY LabelUse the 5∞ buttons to select KEY Label and press Enter Select Function will flash in the display Adjusting the Light on the Remote Control Light and press Enter Clearing Remote Control Settings You Have Input Resetting the Main Unit When resetting the receiver make sure the MultiRoom feature is off Fine Tuning Your System Other System Settings Press the System Setup button THX Cinema SetupFine Tuning Your System Default is PRO Logic ll Movie This exits the DIGITAL-IN Select mode DIGITAL-IN Select should beSelected, if not use the 5∞ buttons Use the 5∞ buttons to select COMPONENT-IN Select then press You will leave the COMPONENT-IN Select modeAssigning the Component Video Inputs Choose between DVD/LD, TV/SAT, VCR1 and VCR2 Cursor through the letters Numbers and symbols. UseUse the Multi JOG to cycle Enter button to enter one PHONO/LINE Setup Default is PhonoUse the 5∞ buttons to select Phono or LINE. Press Enter Select 12V TRIGGER. Press Looking at the on-screen display onYour TV, use the 5∞ buttons to Component you want to use Expert Setup Expert settings. Use the 5∞ buttonsTo navigate through the menus Crossover Network Fine Channel Level Fine Channel Delay 100 Acoustic CAL EQ This explanation is for Custom 1 or Custom Test tones will sound To use the Data Check feature follow the steps here That channel appears so you can check the setting102 103 Bass Peak Level 104 Dynamic Range Control 105 Techno Tidbits & Problem-solvingDolby Dolby Digital 106 DTSDTS-ES THX 107 Schemata of Setup Screens 108 Speaker Placement Information 109 Speaker Placement for a Complete THX Speaker System Speaker Placement for DVD-Audio etc. Sources110 Troubleshooting 111 112 113 114 115 Preset Code Brands 116Brand 117 NEC Nokia Oceanic Nordmende Okano Onwa Techno Tidbits & Problem-solving EIA Maintenance of External Surfaces118 Specifications TNGZF/02K00001 Printed