Pioneer VSX-45TX manual Displays & Controls

Displays & Controls

8MCACC indicator (see pages 13–15, 50)

Lights when the ACOUSTIC CAL EQ is on. (After the Auto Surround Sound Setup has been completed the ACOUSTIC CAL EQ is set on and this display will light.)

9MULTI CH IN button

Use this button to select the component you have hooked up to the MULTI CH IN terminals (for example, a DVD-Audio player).

10ACOUSTIC EQ button (see page 50, 100–102)

Press to switch on/off and select the type of acoustic calibration EQ.

11MASTER VOLUME dial

Use to raise or lower the volume of the receiver.

–/+

Selects station memories or frequencies when using the tuner.

TUNER EDIT

Press to memorize and name a station for recall using the MULTI JOG and ENTER buttons.

17 MULTI ROOM & SOURCE buttons (See pages 74–79)

Press to use the multi room feature (requires an optional PIONEER Multi-Room Remote Sensor Unit MR-100 or another IR receiver).

CONTROL button (see pages 74–79)

Used together with the INPUT SELECTOR to select the function or use with the MASTER VOLUME to select the volume of the MULTI ROOM system.

12 MULTI JOG CONTROL buttons

SET UP

Press to switch the SYSTEM SETUP mode.

RETURN

Press to move back one step in the SYSTEM SETUP process.

13 SIGNAL SELECT button (see page 45)

Press SIGNAL SELECT repeatedly to select one of the following:

AUTO – If there are analog and digital signals input, the receiver automatically selects the digital signal.

DIGITAL – To select an optical or coaxial digital signal.

ANALOG – To select an analog signal.

14 Hi-BIT Hi-SAMPLING button (see page 53)

Use this button to switch the HI-BIT HI-SAMPLING mode on or off. Use to hear CD and DVD, as well as other digital soundtracks, at a wider dynamic range, allowing for finer audio reproduction.

ON/OFF button (see pages 74–79)

Use to switch MULTI ROOM function on or off.

18 PHONES jack

Connect headphones for private listening (no sound will be heard through the speakers).

19 SPEAKERS (A/B) button

The use of this button depends on how the SURRBACK SYSTEM (see page 37) is set. If NORMAL SYSTEM or MR&S is chosen this button toggles between A and OFF. If SECOND ZONE is chosen this button toggles between A, B, A+B and OFF.

20 TONE control buttons (see page 52) TONE button

This button switches between TONE ON and TONE BYPASS, which bypasses the tone circuitry.

BASS/TREBLE button

Use to select whether the bass or treble will be adjusted.

–/+ buttons

Use to adjust the frequency levels.

PREPARATION

15 SB CH MODE button (see page 54)

Use this button to turn the surround back channels ON/OFF/AUTO or switch the VIRTU- AL SURROUND BACK mode between ON/ OFF/AUTO.

16 TUNER CONTROL buttons (See pages

57-61)

BAND

Press to select the AM or FM band.

21 SET UP MIC jack (see page 13)

Plug in the set up mic here. This is very important in order to set up your system and get proper surround sound.

22 VIDEO INPUT jacks (see page 18)

DIGITAL IN

Digital input for connecting a game console, DVD player, video camera (etc.), that has an optical digital connection.

CLASS	S-VIDEO
Press repeatedly to switch the preset station	Video input for connecting a portable DVD player,
classes.	video camera (etc.), that has an S video out.
SELECT	RCA VIDEO /AUDIO (L/R)

Switches the –/+ buttons between station memory and frequency select modes.

Video input for connecting a portable DVD

player, video camera, etc. That has standard 29 RCA video/audio outputs.