Pioneer VSX-45TX manual Digital NR DNR button see, Video Select button see, HI-BIT button see

Displays & Controls

DIGITAL NR (DNR) button (see page 50)

Switches the DIGITAL NR on or off.

VIDEO SELECT button (see page 56)

Use to toggle between the different video input possibilities.

HI-BIT button (see page 53)

Use this button to switch the HI-BIT HI-SAMPLING on or off. Use to hear CD and DVD, as well as other digital soundtracks at a wider dynamic range, allowing for finer audio reproduction.

5SYSTEM SET UP button

Use for all system setups, including the speaker and sound systems. For more informa- tion see. “Setting up for Surround Sound“ starting on page 36. For a DVD player use this button to bring up the DVD menu and for a tuner use this button in the same way as the TUNER EDIT button.

0Listening mode buttons (see page 46– 48)

SURROUND buttons (MOVIE, MUSIC, \ & ENTER):

MOVIE: Press to put the receiver into MOVIE listening mode (see page 47).

MUSIC: Press to put the receiver into MUSIC listening mode (see page 48).

\: Use to select the MOVIE or MUSIC listening mode.

ENTER: Use this button to enter information concerning the listening modes.

STEREO/DIRECT: Switches the receiver into STEREO mode if it was in a different sound mode or toggles between DIRECT and STEREO mode.

DIRECT playback bypasses the tone controls and channel level for the most accurate reproduction of a program source.

PREPARATION

65˜∞˜2˜3˜ENTER buttons

These buttons can be used for a variety of operations in the SYSTEM SETUP menu.

These buttons are used to control the menus for other components when in those modes (DVD, digital TV tuner, satellite tuner, cable tuner, etc.). In TUNER mode, they can select a station and/or a frequency.

7AUDIO button

Use to switch the audio tracks of a DVD when in DVD mode.

8Command button for other components (see pages 66–67)

Use these buttons to control other components you selected with the MULTI CONTROL buttons. You must input the preset code in order use this function (see page 62–63).

9TV CONTROL buttons

The following buttons are used to control the TV only and can be used once they are preset to control your TV.

TV INPUT: Press to select the input source for the TV.

TV CH +/– :Use these buttons to change the channel of the TV.

TV VOL +/– :Press to control the volume of the TV.

-SB CH MODE button (see page 54)

Use this button to turn the surround back channels ON/OFF/AUTO or switch the VIRTU- AL SURROUND BACK mode between ON/ OFF/AUTO.

=SYSTEM OFF button (see pages 82–83)

This button turns off components in two ways. First, when pressed it will turn off all PIONEER components. Secondly, any component that has programmed into the SYSTEM OFF settings will be turned off.

For example: If you programmed power off in the SYSTEM OFF settings for your TV and VCR, pressing the SYSTEM OFF button will turn off these components even if they are not

PIONEER products.

~ RECEIVER (STANDBY/ON) button

Press to turn power of the receiver on or to standby (off).

!MULTI OPERATION button

Use this button to start the MULTI OPERATION mode. See page 80–81 for how to program and use the MULTI OPERATION mode.

@RECEIVER button

Use this button to switch the remote control into receiver mode in order to get certain receiver functions or do receiver setups.

#TOP MENU/GUIDE button

Use to find stations or menus on a digital TV tuner. For a DVD player use this button to bring up the DVD menu.

31