Pioneer VSX-45TX manual 8Use the 5∞ buttons to adjust the TRIM, 8 to adjust all the channels

Fine Tuning Your System

7	Center EQ
		63Hz		[	+2. 0dB ]
		125Hz		[	+2. 5dB ]
		250Hz		[	-4.	0dB ]
		4 kHz		[	-5.	5dB ]
	11.3 kHz			[	+0.	5dB ]
		TRIM		[	+1.	0dB	]
9	[Exit]
	Center EQ
		63Hz		[	+2. 0dB ]
		125Hz		[	+2. 5dB ]
		250Hz		[	-4.	0dB ]
		4 kHz		[	-5.	5dB ]
	11.3 kHz			[	+0.	5dB ]
		TRIM		[	+0.	0dB ]
	[	Exit	]

1	Acoustic Cal EQ
	[ CUSTOM1 ADJUST ]
	[ CUSTOM2 ADJUST ]
	[ DATA COPY		]
	[	DATA CHECK	]
		[Exit	]

2 Acoustic Cal EQ

[ ALL CH ADJUST ] [ FRONT ALIGN ]

[Exit]

3	ALL CH ADJUST
	[ Front		L		EQ ]
	[	Center			EQ		]
	[	Front	R		EQ		]
	[ Surround R EQ ]
	[ SurrBack			R EQ ]
	[ SurrBack			L	EQ ]
	[ Surround L				EQ ]
	[Exit ]
4	Center EQ
		63Hz		[	+1. 5dB ]
		125Hz		[	+2. 5dB ]
		250Hz		[	-4.	0dB ]
		4 kHz		[	-5.	5dB ]
	11.3 kHz			[	+0.	5dB ]
		TRIM		[	+0.	0dB ]
	[Exit]

7TRIM should be selected (if it isn’t use the 5∞ buttons to select it) and press ENTER.

8Use the 5∞ buttons to adjust the TRIM

and press ENTER.

TRIM will balance the volume level of each frequency in the overall volume of that speaker.

9EXIT should be selected (if it isn’t use the 5∞ buttons to select it) and press ENTER.

10The cursor automatically goes to the next channel. Press ENTER and repeat steps 3

– 8 to adjust all the channels.

11EXIT should be selected (if it isn’t use the

5∞ buttons to select it) and press ENTER.

Leave the setup by using the 5∞ buttons to select EXIT and pressing ENTER. You can now go to DATA CHECK or leave the ACOUSTIC CAL EQ setting by using the 5∞ buttons to select EXIT and pressing ENTER.

To use the DATA CHECK feature follow the steps here.

1Use the 5∞ buttons to select DATA

CHECK. Press ENTER.

2Select either ALL CH ADJUST or FRONT ALIGN as the data you want to check. Press ENTER.

3Use the 5∞ buttons to select the channel

that you want to check. Press ENTER.

That channel appears so you can check the setting.

4When that channel has been checked, use the 5∞ buttons to select the EXIT and press ENTER.

5Repeat step 3 & 4 to check all the channels.

6When all channels have been checked select EXIT (if it's not already selected)

and press ENTER.

Leave the setup by using the 5∞ buttons to select EXIT and pressing ENTER. You can now go to another ACOUSTIC CAL EQ setting by using the 5∞ buttons and pressing ENTER.

102