Pioneer VSX-45TX manual Display

Displays & Controls

Display

All the display information is explained and/or referenced here.

1 2 3 4 5 6 7

	SIGNAL			PRO LOGIC Neo :6 LOUDNESS
	AUTO				DIGITAL
		RF		DTS ES EX
DIGITAL				STEREO
ANALOG
	SB CH						DSP
	AUTO		ON			MOVIE
			OFF			MUSIC

LFE

SP A B

MIDNIGHT TONE DNR

STEREO MONO

TUNED

Hi-BIT/

SAMPLING MULTI-ROOM

dB

13 12 11 10 9 8

1SIGNAL SELECT indicators

Light to indicate the input signal you selected.

AUTO: Lights when the receiver is set to select the input signal automatically.

DIGITAL: Lights when digital audio signals are selected.

ANALOG: Lights when analog signals are selected.

2 Digital format indicators

PRO LOGIC II: Lights during Dolby Pro Logic II processing.

NEO:6: Lights during NEO:6 processing.

2DIGITAL: Lights when a Dolby Digital signal is detected.

DTS: Lights when a DTS signal is detected.

ES: Lights when playing back a DTS ES signal.

EX: Lights when playing back a Dolby Digital EX signal.

STEREO: Lights during two-channel playback.

3LOUDNESS indicator

Lights when LOUDNESS is on.

4MIDNIGHT indicator

Lights when MIDNIGHT is on.

10Hi-BIT/SAMPLING indicator

Lights when a HI-BIT/SAMPLING mode is on.

11DSP indicators

MOVIE: Lights when a MOVIE mode is selected. When a DSP MOVIE mode is select- ed DSP will light with a box around it.

MUSIC: Lights when a MUSIC mode is selected. When a DSP MUSIC mode is select- ed DSP will light with a box around it.

12Program Format indicators

For Dolby Digital or DTS sources: These indicators change according to which channels are active in the source. When all three LS (left surround), S (surround) and RS (right surround) light at the same time it means a source with a 6.1 channel playback flag is being used.

L – Left front channel. C – Center channel.

R – Right front channel.

LS – Left surround channel.

S – Surround channel or Surround back channel. RS – Right surround channel.

LFE – Low Frequency Effects channel.

PREPARATION

5TONE indicator

Lights when the TONE control is on.

6DNR indicator

Lights when DIGITAL NR is on.

7TUNER indicators

STEREO: Lights when an FM stereo broadcast is received in the auto stereo mode.

MONO: Lights when the tuner is set to receive FM broadcasts and when MPX mode is selected.

TUNED: Lights when a broadcast is received.

8Volume level indicator

9MULTI ROOM indicator

Lights when the MULTI ROOM system is on.

‡– Lights when LFE signal is input.

13SB CH indicators

Light to indicate the status of the surround back channels.

AUTO – Lights when the SB CH MODE or VIRTUAL SURROUND BACK mode is set to AUTO.

ON – Lights when the SB CH MODE or VIRTUAL SURROUND BACK mode is set to ON.

OFF – Lights when the SB CH MODE or VIRTUAL SURROUND BACK mode is set to OFF.

33