Pioneer VSX-45TX manual Multi Room setup, Turn on the receiver, your TV and press

Using Other Functions

MULTI ROOM setup

VCR2	VIDEO	CD	MULTI	1	1	Turn on the receiver, your TV and press
			OPERATION
TAPE1	TAPE2	TUNER	RECEIVER
CD-R/	MD/					RECEIVER on the remote control.
1	2	3	4
DIMMER	LOUDNESS	TONE	EFFECT/CH SEL

SIGNAL SEL	DNR	BASS/TREBLE +		Make sure your TV is set to the receiver.
5	6	7	8
VIDEO SEL	HI-BIT	+10	–	DISC
9	0		ENTER

2

3-7

3

4

5

6

	DIRECT ACCESS	SEARCH MODE
SYSTEM SETUP		GUIDE
MENU		TOP MENU
TUNER EDIT		TRACK
	ENTER
		EXIT
AUDIO		RETURN
MPX	DTV ON/OFF	DISP MODE
¶	8	SUB TITLE
TUNING –	BAND	TUNING +

1 3 ¡

STATION –	DTV MENU CLASS	STATION +
4	7	¢
CHANNE –		CHANNE +

System Setup

[1.		Surround Setup	]
[2. THX CINEMA Setup ]
[3.		Input Assign	]
[4.		Function Rename	]
[5.		PHONO/LINE Setup ]
[	6. Multi Room		]
[7.		12V Trigger	]
[Exit			]

6. Multi Room

Volume Level [VARIABLE ]

IR Receiver [PIONEER ]

[Exit]

CAUTION: If the "FIXED" position is chosen,the volume will be loud.

6. Multi Room

Volume Level

[VARIABLE ]

IR Receiver

[OTHERS ]

[Exit]

CAUTION: If the "FIXED" position is chosen,the volume will be loud.

6. Multi Room

Volume Level

[VARIABLE ]

IR Receiver

[OTHERS ]

2Press the SYSTEM SETUP button.

The SYSTEM SETUP menu appears on the OSD.

3Use the 5∞ buttons to select MULTI

ROOM. Press ENTER.

4VOLUME LEVEL should be selected (if it isn't use the 5∞ buttons to select it).

Press ENTER.

Use the 5∞ buttons to select the VOLUME LEVEL, VARIABLE or FIXED. Press ENTER.

If you hook up a just a power amplifier in the sub room the VSX-45TX will act as a pre-amp. In this case choose VARIABLE. If you hook up a full integrated amplifier in the sub room (such as another Pioneer VSX receiver) choose

FIXED.

CAUTION!

If the MULTI ROOM is set to FIXED the volume on the main unit will be set to maximum. Thus, when output, it will be extremely loud. Please set the master volume controls of the integrated amplifier in the sub room very low at first and experiment to find the correct volume.

5IR RECEIVER should be selected (if it isn't use the 5∞ buttons to select it).

Press ENTER.

Use the 5∞ buttons to select the IR RECEIVER type, PIONEER or OTHERS. Press ENTER.

If you have an IR receiver from a different company than PIONEER, select OTHERS. If you have the Pioneer-made MR-100, or the IR receiver you're using doesn't seem to work after selecting OTHERS, select PIONEER.

[Exit ]

CAUTION: If the "FIXED"

position is chosen,the

volume will be loud.6 Use the 5∞ buttons to select EXIT, then press ENTER to go back to the SYSTEM SETUP menu.

memo

There may be some IR receivers that can't be used with this receiver. Check with a PIONEER representative to be sure.

If you selected MR&S in the SURRBACK SYSTEM setting on page 37 you won't be able to set the VOLUME LEVEL.

7Use the ∞5 buttons to select EXIT and

press ENTER.

You will exit the SYSTEM SETUP menu and return to normal operation.

76